Bosch Rexroth | PVV4-1X113RD
PVV4-1X/113RD
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV4-1X/113RD pump belongs to the PV Fixed Displacement Pumps series and is produced by Bosch Rexroth for hydraulic automation circuits where a constant displacement unit is required. It delivers 112.7 cm³ of fluid per revolution, so flow is directly proportional to shaft speed and simplifies volume calculations. When driven at 1500 rpm it provides a flow of 167 l/min, matching medium-size actuator demands. The pump can run as slow as 600 rpm for low-duty cycles and up to 1800 rpm at a 1 bar inlet, giving users a wide operating window. Clockwise shaft rotation must be observed to maintain correct internal porting. A SAE-C mounting flange standardizes attachment to common power take-offs. The unit is intended for HLP mineral oil specified in DIN 51524-2, and it requires a minimum viscosity of 13 mm²/s to keep hydrodynamic lubrication stable.
Continuous system pressure may reach 175 bar, allowing the pump to supply moderate-pressure mobile or industrial circuits without overload. Suction conditions should not drop below an absolute inlet pressure of 0.83 bar so cavitation is avoided during high flow demand. The permitted fluid temperature rises to 70 °C, enabling operation in warm return-line environments. Pressure delivery leaves through a SAE 1 1/4 in port that sits on the top side in line with the inlet orientation, simplifying rigid tube routing in compact manifolds. Fluid entry is through a larger SAE 2 in suction port to keep inlet velocities low. Acceptable contamination levels are limited to ISO 4406 code 20/18/15 to protect the sliding surfaces. The pump weighs 23 kg, which influences support bracket sizing when mounted on machinery.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Displacement
112.7 cm³/rev
Fluid Temperature Max
70 °C
Inlet Pressure Min (abs.)
0.83 bar
Max Continuous Pressure
175 bar
Max Flow @1500 Rpm
167 l/min
Max Speed (1 Bar Inlet)
1800 rpm
Min Speed
600 rpm
Mounting Flange
SAE-C
Pressure Fluid
HLP Mineral Oil (DIN 51524-2)
Pressure Port
SAE 1 1/4 in
Pressure Port Position
Top (0° From Inlet)
Rotation
Clockwise
Suction Port
SAE 2 in
Viscosity Min
13 mm²/s
Weight
23 kg
1620 Old Apex Road
Shipping & Payment Options
