Bosch Rexroth | PVV4-1X113RA15DMC
PVV4-1X/113RA15DMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV4-1X/113RA15DMC hydraulic pump belongs to the PV Fixed Displacement Pumps series and is manufactured by Bosch Rexroth for use in automated hydraulic power units. A fixed displacement of 112.7 cm³ per revolution defines the volume delivered each shaft turn, giving predictable actuator speed. Flange mounting in accordance with SAE J744 eases alignment on motor bell housings, and the SAE-C (127-2) flange version matches many diesel and electric drives. Clockwise rotation suits standard prime mover orientation, while an inlet and outlet that are independent of rotation allow flexible hose layout. The connection type uses SAE suction and pressure ports with UNC threads for consistent fittings, and placing the pressure port on the top at 0° from the inlet helps purge air during commissioning. A pressure outlet size of SAE 1 1/4 and a suction inlet size of SAE 2 establish hose diameters that support the intended flow rate.
The unit sustains continuous operating pressure up to 175 bar so it can run cylinders, motors, and logic valves in industrial machinery. A maximum flow of 167 L/min at 1500 rpm supports medium-capacity circuits, while a speed window from 600 rpm minimum to 1800 rpm maximum at 1 bar inlet pressure covers both low-speed cooling runs and full-output duty. NBR sealing material resists standard hydraulic oils and maintains system integrity throughout the pressure range. The pump weighs 23 kg, keeping it within the load limits of common mounting brackets and enabling single-person handling during service. These operating limits and material choices allow the pump to deliver stable, fixed-volume flow for presses, injection machines, and other automated hydraulic equipment.
Technical Specifications
Connection Type
SAE suction and pressure (UNC)
Continuous Pressure
175 bar
Displacement
112.7 cm3/rev
Flange Version
SAE-C (127-2)
Flow Direction
Inlet/outlet independent of rotation
Max Flow (1500 Rpm)
167 l/min
Max Speed (1 Bar Inlet)
1800 rpm
Min Speed
600 rpm
Mounting Style
Flange mounting (SAE J744)
Pressure Port Position
Top (0° from inlet)
Pressure Port Size
SAE 1 1/4
Rotation
Clockwise
Seal Material
NBR (M)
Suction Port Size
SAE 2
Weight
23 kg
1620 Old Apex Road
Shipping & Payment Options
