Bosch Rexroth | PVV4-1X098RA15UVC
PVV4-1X/098RA15UVC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV4-1X/098RA15UVC is manufactured by Bosch Rexroth for the PV Fixed Displacement Pumps series and supplies a constant volume of hydraulic fluid for automated machinery. Its displacement is 97.7 cm³, defining the amount of oil moved each shaft revolution. At 1,500 rpm the pump delivers up to 141 l/min, meeting medium flow demands, while a permissible peak speed of 1,800 min⁻¹ at 1 bar absolute inlet pressure allows short-term output increases; operation must not drop below 600 min⁻¹ to prevent slip. Clockwise rotation coordinates with standard prime movers, and a SAE-C (127-2) mounting flange positions the unit on common bell housings. The housing weighs 23 kg, affecting handling requirements, and the pressure section withstands 175 bar to serve moderate-pressure circuits.
The pump handles fluid temperatures from −10 °C to +70 °C, enabling cold starts and sustained warm running, and an FKM shaft seal maintains integrity across this range. Oil viscosity must remain above 13 mm²/s so internal bearings receive adequate lubrication. Suction conditions are confined to 0.83–2.4 bar absolute; this window prevents cavitation while avoiding excessive inlet load. A SAE 2-inch suction port eases connection to low-restriction hoses, and the discharge side uses a SAE 1 1/4-inch pressure port that matches standard high-pressure lines. Together, these interface sizes, pressure limits, and temperature boundaries support reliable filling, stable discharge, and long service life in hydraulic automation systems.
Technical Specifications
Displacement
97.7 cm3
Fluid Temp Max
+70 C
Fluid Temp Min
-10 C
Inlet Pressure Max
2.4 bar abs
Inlet Pressure Min
0.83 bar abs
Max Flow (1500 Min-1)
141 l/min
Max Operating Pressure
175 bar
Max Speed (1 Bar Abs)
1800 min-1
Min Speed
600 min-1
Mounting Flange
SAE-C (127-2)
Pressure Port Size
SAE 1 1/4 in
Rotation Direction
Clockwise
Seal Material
FKM
Suction Port Size
SAE 2 in
Viscosity Min
13 mm2/s
Weight
23 kg
1620 Old Apex Road
Shipping & Payment Options
