Bosch Rexroth | PVV4-1X069RA15UMC
PVV4-1X/069RA15UMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV4-1X/069RA15UMC pump belongs to the PV Fixed Displacement Pumps series and is manufactured by Bosch Rexroth. It delivers a displacement of 69.0 cm³ per revolution, providing consistent fluid volume for hydraulic automation. At 1500 rpm the unit supplies 101 l/min, giving predictable flow in medium-pressure circuits. A continuous pressure limit of 175 bar supports closed-loop operation without overstressing internal parts. Drive motors can apply up to 407 Nm to the shaft in version A, matching the torque capability of this model. Reliable startup is possible from 600 rpm, and the inlet must stay above 0.9 bar absolute to avoid cavitation. The pump is configured for clockwise rotation, and a SAE 2 in suction port accepts large hoses that minimize inlet velocity losses.
SAE J744 flange mounting lets the pump bolt directly to standard power units, and the flange pattern matches the SAE-C 127-2 code for precise shaft alignment. The pressure outlet sits on the bottom, 180° from the inlet, so stacked installations can keep discharge lines compact. Pressure connections use a SAE 1 1/4 in port, allowing high-flow fittings without adapters. Power transfer relies on a cylindrical shaft end identified as version A, simplifying coupling selection. NBR seals contain mineral hydraulic oil and withstand typical system temperatures. The assembly weighs 23 kg, light enough for manual positioning during service.
Technical Specifications
Continuous Pressure
175 bar
Displacement Volume
69.0 cm3/rev
Max Shaft Torque (version A)
407 Nm
Maximum Flow At 1500 Rpm
101 l/min
Minimum Inlet Pressure (abs)
0.9 bar
Minimum Speed
600 min-1
Mounting Flange
SAE-C (127-2)
Mounting Style
SAE J744 Flange Mounting
Pressure Port Position
Bottom (180° From Inlet)
Pressure Port Size
SAE 1 1/4 in
Rotation Direction
Clockwise
Seal Material
NBR
Shaft End Type
Cylindrical (Version A)
Suction Port Size
SAE 2 in
Weight
23 kg
1620 Old Apex Road
Shipping & Payment Options
