Bosch Rexroth | PVV2-1X068RB15DMB
PVV2-1X/068RB15DMB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV2-1X/068RB15DMB fixed-displacement pump is produced by Bosch Rexroth within the PV Fixed Displacement Pumps series to supply steady hydraulic flow in automated machinery. A displacement of 67.5 cm³ per revolution establishes the volume delivered each shaft turn, while the clockwise rotation requirement guides motor orientation during assembly. The pump tolerates a continuous 175 bar working pressure, allowing medium-pressure circuits to run without overstressing components. At 1,500 rpm it can deliver up to 100 l/min, supporting cylinders and motors that demand high throughput. Operating speed can rise to 1,800 rpm when inlet pressure is at least 1 bar absolute, extending the usable range for variable-speed drives. A SAE-B mounting flange provides direct fitment to standard prime movers, and the pressure port is placed on the top at 0° from the inlet so hose runs remain short and unobstructed.
The suction side uses a SAE 1 ½-inch connection to keep inlet velocity low and reduce cavitation risk, whereas discharge exits through a SAE 1-inch port sized for mainstream piping. A 25.37 mm shaft couples to the driver, and the included 6.36 × 50.8 mm key secures torque transmission. The drive train can handle up to 400 N·m, giving reserve for cold-start viscosity peaks. NBR seals contain system fluid and remain flexible across typical temperature swings, and the pump is intended for HLP mineral oil per DIN 51524-2 to ensure material compatibility. Total weight is 14.8 kg, light enough for one-person handling yet heavy enough to damp vibration and maintain alignment under load.
Technical Specifications
Direction Of Rotation
Clockwise
Displacement
67.5 cm3/rev
Fluid Type
HLP mineral oil (DIN 51524-2)
Key Size
6.36 x 50.8 mm
Max Continuous Pressure
175 bar
Max Flow (1500 Min-1)
100 l/min
Max Shaft Torque
400 Nm
Max Speed (1 Bar Abs Inlet)
1800 min-1
Mounting Flange
SAE-B
Pressure Connection
SAE 1 in
Pressure Port Location
Top (0° from inlet)
Seal Material
NBR
Shaft Diameter
25.37 mm
Suction Connection
SAE 1 1/2 in
Weight
14.8 kg
1620 Old Apex Road
Shipping & Payment Options
