Bosch Rexroth | PVV2-1X060RA15UMB
PVV2-1X/060RA15UMB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV2-1X/060RA15UMB pump is produced by Bosch Rexroth as part of the PV Fixed Displacement Pumps series. It supplies a constant hydraulic volume for automation circuits that require predictable flow. The displacement is 60.0 cm³ per revolution so each shaft turn delivers a fixed charge to the system. Operating direction is clockwise to match drives that rotate in the standard right-hand orientation. With a mounting flange specified as SAE-B 101-2, the housing aligns with common industrial motor adapters. A cylindrical shaft end allows straightforward coupling to keyed hubs without tapered fittings. Continuous pressure capability reaches 175 bar, which supports medium-pressure actuation tasks. At 1500 rpm the pump outputs up to 89 L/min, providing sufficient oil for multi-axis machines. Minimum operating speed is 600 rpm, ensuring stable lubrication at low cycle rates.
For higher demands the PVV2-1X/060RA15UMB can run to 1800 rpm when inlet pressure is 1 bar, expanding its flow envelope without cavitation. The recommended pressure fluid is HLP mineral oil according to DIN 51524-2 so seals and bearings receive adequate lubrication. Maximum fluid viscosity tolerated is 860 mm²/s, allowing cold-start operation with heavy oils. Service temperature ranges from −10 °C to +70 °C to cover most indoor and mobile equipment climates. The suction port uses an SAE 1 1/2 in fitting to admit low-pressure oil, while the pressure port is SAE 1 in and located on the bottom at 180°, streamlining manifold layouts. The cleanliness level of 20/18/15 under ISO 4406 must be maintained to protect internal gear surfaces from abrasion. These design details define the pump’s integration limits and support reliable hydraulic performance.
Technical Specifications
Cleanliness Class (iso 4406)
20/18/15
Continuous Pressure
175 bar
Direction Of Rotation
Clockwise
Displacement
60.0 cm3/rev
Max Flow (1500 Rpm)
89 l/min
Max Fluid Temperature
+70 °C
Max Fluid Viscosity
860 mm2/s
Maximum Speed (1 Bar Inlet)
1800 rpm
Min Fluid Temperature
-10 °C
Minimum Speed
600 rpm
Mounting Flange
SAE-B (101-2)
Pressure Fluid
HLP Mineral Oil DIN 51524-2
Pressure Port Location
Bottom (180°)
Pressure Port Size
SAE 1 in
Shaft End Type
Cylindrical
Suction Port Size
SAE 1 1/2 in
1620 Old Apex Road
Shipping & Payment Options
