Bosch Rexroth | PVV2-1X055RB15DMB
PVV2-1X/055RB15DMB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV2-1X/055RB15DMB is produced by Bosch Rexroth as part of the PV Fixed Displacement Pumps series for hydraulic automation where a constant volume is required. The pump delivers 55.2 cm³ of fluid per revolution, establishing the system flow at any given speed. A continuous operating limit of 175 bar lets it maintain circuit pressure during industrial duty cycles. When the inlet is at 1 bar the shaft can reach 1,800 rpm, providing high power density, while operation down to 600 rpm supports low-speed circulation. At 1,500 rpm it supplies up to 80 l/min to match medium-size actuator demands. Clockwise shaft rotation aligns with standard right-hand drive layouts, and a drive-shaft torque capacity of 400 Nm defines the mechanical load that can be applied without damaging splines or bearings.
Installation follows the SAE J744 flange mount pattern, and the housing uses an SAE-B flange so it mates directly with engines or gearboxes. The pressure port is on the top face at 0°, simplifying rigid line routing and easing air removal during filling. That outlet accepts an SAE 1-inch fitting, while the suction side uses a larger SAE 1 ½-inch port to limit inlet velocity and prevent cavitation. Internal sealing relies on NBR elastomers, allowing use with standard mineral oils. Fluid cleanliness must be kept to ISO 4406 code 20/18/15 to minimize wear on internal surfaces. The bare unit weighs 14.8 kg, a figure that influences handling equipment selection and bracket design.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Continuous Pressure
175 bar
Direction Of Rotation
Clockwise
Displacement
55.2 cm3/rev
Drive Shaft Permissible Torque
400 Nm
Max Flow (1500 Min-1)
80 l/min
Max Speed (1 Bar Inlet)
1800 min-1
Min Speed
600 min-1
Mounting Flange
SAE-B
Mounting Style
Flange Mount SAE J744
Pressure Port Location
Top (0° From Inlet)
Pressure Port Size
SAE 1"
Seal Material
NBR
Suction Port Size
SAE 1 1/2"
Weight
14.8 kg
1620 Old Apex Road
Shipping & Payment Options
