Bosch Rexroth | PVV2-1X055RA15UMB
PVV2-1X/055RA15UMB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV2-1X/055RA15UMB pump is part of the PV Fixed Displacement Pumps series from Bosch Rexroth and supplies a constant volume of hydraulic fluid for automation circuits. Its displacement is 55.2 cm³ per revolution, setting the flow rate produced at any given speed. A continuous outlet pressure rating of 175 bar enables the pump to maintain high system pressure without overstress. When driven at 1,500 rpm it delivers up to 80 l/min, while a permissible maximum of 1,800 rpm at 1 bar inlet pressure allows faster cycles when required. Operation may slow to 600 rpm without flow instability, expanding the usable speed range. Clockwise rotation matches common prime movers, and a cylindrical shaft end in version A provides straightforward coupling. Mounting is handled by an SAE-B (101-2) flange so the housing locates easily on standard pump pads.
The unit is intended for HLP mineral oil conforming to DIN 51524-2, ensuring proper lubrication and compatibility with internal materials. Inlet conditions can reach 2.4 bar absolute without risking seal blow-by, while a minimum of 0.83 bar absolute must be maintained to prevent cavitation. The pressure port sits on the bottom, 180° from the inlet, to simplify line routing in horizontal installations; its SAE 1 inch size suits medium-diameter piping. A larger SAE 1 1⁄2 inch suction port reduces inlet velocity so the pump meets the stated flow figures. NBR seals contain the fluid and resist mineral oil aging, and an overall weight of 14.8 kg permits manual handling during assembly or maintenance.
Technical Specifications
Continuous Outlet Pressure
175 bar
Displacement
55.2 cm3/rev
Flange Version
SAE-B (101-2)
Fluid Type
HLP Mineral Oil (DIN 51524-2)
Max Flow @ 1500 Rpm
80 l/min
Max Inlet Pressure (abs)
2.4 bar
Max Speed (1 Bar Inlet)
1800 rpm
Min Inlet Pressure (abs)
0.83 bar
Min Speed
600 rpm
Pressure Port Position
Bottom (180° from inlet)
Pressure Port Size
SAE 1"
Rotation Direction
Clockwise
Seal Material
NBR
Shaft End Type
Cylindrical (Version A)
Suction Port Size
SAE 1 1/2"
Weight
14.8 kg
1620 Old Apex Road
Shipping & Payment Options
