Bosch Rexroth | PVV2-1X040RA15DMB
PVV2-1X/040RA15DMB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV2-1X/040RA15DMB belongs to the PV Fixed Displacement Pumps series from Bosch Rexroth and provides a steady oil supply for hydraulic automation circuits. With a nominal displacement of 40.1 cm³ per revolution, the pump delivers a constant volume that scales with drive speed. At 1500 rpm it can move up to 59 L/min, supporting medium-capacity actuators. A continuous operating pressure of 175 bar allows the housing and gear set to drive presses, clamps, or feeds without excessive stress. Permitted speeds range from 600 to 1800 rpm when the inlet is held at 1 bar, giving designers latitude to couple different prime movers. Clockwise rotation matches standard right-hand engine outputs found in mobile machinery. The unit runs on HLP DIN 51524-2 hydraulic oil, which maintains proper viscosity and corrosion protection. NBR seals contain the fluid and prevent external leakage under the stated operating conditions.
Installation details include a SAE-B (101-2) mounting flange that mates directly to common B-size motor faces for rapid assembly. The 22.23 mm shaft diameter fits standard keyed hubs and preserves alignment under load. A maximum shaft torque of 250 Nm enables the pump to transmit full pressure without shearing the coupling. Discharge oil exits through a SAE 1" pressure port positioned on the top side at 0° from the inlet, reducing pipe bends in confined powerpacks. The suction connection is a larger SAE 1 1/2" port, sized to lower inlet velocity and limit cavitation during high-flow demand. Together, these interface dimensions and torque limits simplify system layout while ensuring that the pump operates at its full rated capacity.
Technical Specifications
Continuous Pressure
175 bar
Max Flow @1500 Min⁻¹
59 L/min
Max Shaft Torque
250 Nm
Maximum Speed (1 Bar Inlet)
1800 min⁻¹
Minimum Speed
600 min⁻¹
Mounting Flange
SAE-B (101-2)
Nominal Displacement
40.1 cm³/rev
Pressure Connection Position
Top (0° from inlet)
Pressure Fluid
HLP DIN 51524-2
Pressure Port
SAE 1"
Rotation
Clockwise
Seals
NBR
Shaft Diameter
22.23 mm
Suction Port
SAE 1 1/2"
1620 Old Apex Road
Shipping & Payment Options
