Bosch Rexroth | PVV1-1X036RJ15UMB
PVV1-1X/036RJ15UMB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV1-1X/036RJ15UMB pump belongs to the PV Fixed Displacement Pumps series and is manufactured by Bosch Rexroth for hydraulic automation circuits. Its displacement is 36.4 cm³ per revolution, so one shaft turn moves that exact oil volume. When driven at 1500 rpm the pump supplies a maximum flow of 53 l/min, supporting medium-size actuator groups. A continuous pressure rating of 210 bar allows the pump to maintain load forces typical of mobile or industrial power units. The allowable speed window starts at 600 min⁻¹ and extends to 1800 min⁻¹, letting machine designers pair the pump with variable-speed prime movers without cavitation or excessive heat. Clockwise rotation is required, ensuring compatibility with standard engine or motor layouts. A 13-tooth 16/32 DP spline on a 7/8-inch SAE-B shaft transmits torque directly from the driver. HLP hydraulic fluid defined by DIN 51524-2 is specified to guarantee adequate lubrication and sealing.
Mounting follows the SAE J744 flange pattern, and the designated SAE-B (101-2) mounting flange centers the housing for accurate pump alignment. The permissible shaft torque is 316 Nm, matching the pressure rating and preventing mechanical overload under full duty. The pressure port is located on the bottom, 180° from the inlet, which simplifies rigid pipe routing in horizontal manifolds; that outlet uses an SAE 3/4-inch connection, while the suction port accepts an SAE 1-1/2-inch fitting to minimize inlet losses at high flow. NBR seals are fitted to resist mineral oil and maintain leak-free operation over the stated pressure range. The pump weighs 12 kg, permitting single-person handling during installation or service. These mechanical and hydraulic characteristics combine with the earlier operating data to give a compact fixed-displacement source that installs easily and withstands continuous industrial duty.
Technical Specifications
Continuous Pressure
210 bar
Displacement
36.4 cm3/rev
Hydraulic Fluid
HLP to DIN 51524-2
Max Flow (1500 Rpm)
53 l/min
Max Speed
1800 min−1
Min Speed
600 min−1
Mounting Flange
SAE-B (101-2)
Mounting Style
SAE J744 Flange
Permissible Shaft Torque
316 Nm
Pressure Port Position
Bottom (180° from inlet)
Pressure Port Size
SAE 3/4 in
Rotation Direction
Clockwise
Seal Material
NBR
Shaft Spline
13T 16/32DP (SAE-B 7/8 in)
Suction Port Size
SAE 1-1/2 in
Weight
12 kg
1620 Old Apex Road
Shipping & Payment Options
