Bosch Rexroth | PVV1-1X027RJ15DMB-A261
PVV1-1X/027RJ15DMB A261
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV1-1X/027RJ15DMB A261 pump belongs to the PV Fixed Displacement Pumps series and is manufactured by Bosch Rexroth. This fixed-displacement unit supplies constant hydraulic flow for automated circuits that rely on steady pressure. It turns clockwise and displaces 27.4 cm³ of fluid each revolution, so output volume is predictable under load. The pump is rated for continuous service at 210 bar, allowing it to support medium-pressure actuator groups. When driven at 1500 rpm it delivers 39 l/min, and it can operate from 600 rpm up to a ceiling of 1800 rpm without derating. Installation uses an SAE-B (101-2) flange with the flange-mounting interface defined by SAE J744, which simplifies coupling to standard electric or diesel prime movers. The pressure circuit must use HLP mineral oil classified under DIN 51524-2 to maintain proper lubrication and sealing.
Mechanical and porting details support integration in mobile or stationary assemblies. The drive shaft can transmit up to 316 Nm, and its spline follows the SAE-B 7/8-inch, 13-tooth, 16/32 DP profile for direct connection to matching couplings. High-pressure fluid exits through an SAE 3/4-inch port that sits on the top face at 0° relative to the inlet, while suction is taken through an SAE 1 1/2-inch port sized for low inlet velocity. NBR seals isolate the working fluid from the environment. Overall, the housing weighs 12 kg, so mounting brackets must support this mass plus dynamic loads.
Technical Specifications
Direction Of Rotation
Clockwise
Displacement
27.4 cm3/rev
Max Continuous Pressure
210 bar
Max Flow (1500 Min–1)
39 l/min
Max Speed
1800 min–1
Min Speed
600 min–1
Mounting Flange
SAE-B (101-2)
Mounting Style
Flange Mounting SAE J744
Permissible Shaft Torque
316 Nm
Pressure Fluid
HLP Mineral Oil (DIN 51524-2)
Pressure Port
SAE 3/4 in
Pressure Port Position
Top (0° From Inlet)
Seals
NBR
Shaft Spline
SAE-B 7/8 (13T, 16/32 DP)
Suction Port
SAE 1 1/2 in
Weight
12 kg
1620 Old Apex Road
Shipping & Payment Options
