Bosch Rexroth | PVQ4-1X069RJ15DMC
PVQ4-1X/069RJ15DMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVQ4-1X/069RJ15DMC is a fixed-displacement hydraulic pump produced by Bosch Rexroth within the PV Fixed Displacement Pumps series and is intended to supply constant flow in automated hydraulic circuits. Its displacement is 69.0 cm³ per revolution, so each shaft turn delivers a precise fluid volume to maintain repeatable actuator motion. The shaft is configured for clockwise rotation, matching right-hand drive trains in many industrial machines. Continuous outlet pressure is rated at 210 bar, enabling the unit to support medium-pressure work functions without overloading internal components. Maximum shaft speed reaches 2500 rpm while minimum permissible speed is 600 rpm, defining the usable operating envelope for variable-speed prime movers. At 1500 rpm the pump can produce up to 101 L/min of flow, which suits moderate-capacity manifolds and cylinder groups. The mounting style follows the SAE J744 flange standard, and the specific 127-2 (SAE-C) flange version aligns the housing with common diesel engine bell housings and electric motor adapters.
The pressure port is located on the top at 0°, allowing straightforward tube routing in horizontal power packs, and the port size of 1 1/4 in SAE flange accommodates high-flow lines with low velocity loss. Suction fluid enters through a 2 in SAE flange, providing a wide inlet that reduces cavitation risk at higher speeds. Acceptable inlet conditions range from 0.83 bar absolute minimum to 2.4 bar absolute maximum; these limits guide reservoir placement and boost pump selection. The pump operates with fluid temperatures between ‑10 °C and +70 °C so it can work in unheated workshops or warm machinery bays without viscosity problems. An NBR seal package resists standard mineral oils and maintains leak-tight performance across the stated temperature span.
Technical Specifications
Continuous Outlet Pressure
210 bar
Direction Of Rotation
Clockwise (R)
Displacement
69.0 cm3/rev
Flange Version
127-2 (SAE-C)
Fluid Temp Range
-10 to +70 °C
Max Flow (1500 Rpm)
101 l/min
Max Inlet Pressure (abs)
2.4 bar
Max Speed
2500 rpm
Min Inlet Pressure (abs)
0.83 bar
Min Speed
600 rpm
Mounting Style
SAE J744 Flange
Pressure Port Position
Top (0°)
Pressure Port Size
1 1/4 in SAE Flange
Seal Material
NBR (M)
Suction Port Size
2 in SAE Flange
1620 Old Apex Road
Shipping & Payment Options
