Bosch Rexroth | PGP2-2X008RJ20VU2
PGP2-2X/008RJ20VU2
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGP2-2X/008RJ20VU2 gear pump is produced by Bosch Rexroth and is part of the PGH High Pressure Gear Pumps series. It supplies pressurized oil to actuators in compact hydraulic systems used in automation. The pump has a displacement of 8.2 cm³ per revolution, so each shaft turn moves a fixed volume suitable for stable flow control. At a reference speed of 1450 rpm it provides 11.9 L/min, covering typical circuit demands for tooling and clamping functions. Acceptable drive speeds range from 600 to 1800 rpm, which permits pairing with standard electric motors running at variable frequencies. Rotation is clockwise, guiding engineers on motor coupling orientation when integrating the unit into power packs. A SAE J498b 9-tooth spline with 16/32 DP and a 30° pressure angle transmits torque without fretting, while the SAE two-hole U2 mounting flange simplifies secure attachment to bell housings. Hydraulic lines are connected through square flanges according to DIN 3901/3902, helping maintain consistent sealing dimensions across equipment. The housing weighs 3.1 kg, allowing manual installation in tight machinery frames.
For circuit sizing, the pump tolerates continuous pressure up to 250 bar and can momentarily reach 350 bar, so cylinder and hose ratings must match these limits. Inlet conditions should stay between 0.8 and 2 bar absolute to avoid cavitation and excessive bearing load. The unit is specified for HL or HLP mineral oils defined in DIN 51524; using this fluid class ensures viscosity and lubricity compatible with the gear set. Permitted oil temperature spans −10 °C to +80 °C, enabling operation in unheated workshops as well as warm production cells. These hydraulic and environmental limits guide reservoir design, cooling selection, and suction line sizing so the pump maintains volumetric efficiency and service life during automated duty cycles.
Technical Specifications
Continuous Pressure Max
250 bar
Direction Of Rotation
Clockwise
Displacement
8.2 cm3/rev
Flow At 1450 Rpm
11.9 L/min
Fluid Temperature Max
+80 °C
Fluid Temperature Min
-10 °C
Hydraulic Fluid
HL/HLP (DIN 51524)
Inlet Pressure Max (abs)
2 bar
Inlet Pressure Min (abs)
0.8 bar
Max Operating Pressure
350 bar
Mounting Flange
SAE 2-Hole (U2)
Ports
Square Flange (DIN 3901/3902)
Shaft Spline
SAE J498b 9T 16/32DP 30°
Speed Max
1800 rpm
Speed Min
600 rpm
Weight
3.1 kg
1620 Old Apex Road
Shipping & Payment Options
