Bosch Rexroth | PGH3-2X013RE07VU2
PGH3-2X/013RE07VU2
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGH3-2X/013RE07VU2 pump belongs to the PGH High Pressure Gear Pumps series produced by Bosch Rexroth for fixed-displacement hydraulic circuits. It converts shaft torque into oil flow for automation systems that need steady volume delivery. The displacement is 13.3 cm³ per revolution, and at 1450 rpm with 10 bar back pressure and 46 cSt viscosity it supplies 19.1 L/min. Continuous operation is permitted up to 315 bar when mineral oils are used. The shaft may turn up to 3000 rpm, and rotation is clockwise viewed from the shaft end. Power is transmitted through a 20 mm cylindrical shaft with a key according to DIN 6885. Mounting is handled by a 2-hole ISO 3019-1 flange, supported by a 101.6 mm spigot that centers the housing.
For elevated duty cycles the unit accepts intermittent peaks of 350 bar without structural damage. Hydraulic fluid temperature can rise to 80 °C, while the surrounding environment may reach 60 °C. Circuit cleanliness must stay within ISO 4406 code 20/18/15 to protect the gear teeth and bearing surfaces from abrasive particles. Inlet oil is drawn through a DN25 (SAE 1 in) suction port, a diameter that keeps inlet velocity low and minimizes cavitation. Pressurized flow leaves the body through a DN13 (SAE 1/2 in) pressure port compatible with standard manifold blocks. Overall mass is 5.0 kg, allowing straightforward handling during installation or service.
Technical Specifications
Ambient Temperature Max
+60 C
Cleanliness Class
ISO 4406 20/18/15
Continuous Pressure (mineral Oils)
315 bar
Direction Of Rotation
Clockwise
Displacement
13.3 cm³/rev
Drive Shaft Diameter
20 mm
Drive Shaft Type
Cylindrical With Key (DIN 6885)
Flow @1450 Rpm (10 Bar, 46 Cst)
19.1 l/min
Hydraulic Fluid Temp Max
+80 C
Maximum Drive Speed
3000 rpm
Mounting Flange
2-Hole ISO 3019-1
Mounting Spigot Diameter
101.6 mm
Peak Pressure (intermittent)
350 bar
Pressure Port
DN13 (SAE 1/2 in)
Suction Port
DN25 (SAE 1 in)
Weight
5.0 kg
1620 Old Apex Road
Shipping & Payment Options
