Bosch Rexroth | PGH2-2X008RE07VU2
PGH2-2X/008RE07VU2
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGH2-2X/008RE07VU2 pump belongs to Bosch Rexroth’s PGH High Pressure Gear Pumps series and supplies fixed-volume flow to hydraulic automation systems. It displaces 8.2 cm³ per revolution, so volume output scales predictably with speed. At 1450 rpm under 10 bar using 46 mm²/s mineral oil, it delivers 11.8 L/min, supporting cylinder actuation or valve banks that need steady flow. Permitted speeds range from 600 rpm to 3000 rpm, giving flexibility for low-noise idle and high-throughput duty cycles. Rotation is clockwise, simplifying drive train alignment with standard right-hand engines. A continuous pressure limit of 315 bar sustains normal operation, and an intermittent ceiling of 350 bar absorbs brief system spikes. The inlet must see at least 0.8 bar absolute to prevent cavitation, and fluid enters through an SAE flange specified by ISO 6162-1 for straightforward suction piping.
For line resilience, the pump uses FKM seals that tolerate mineral oil and resist swelling across the stated temperature window. Operating oil can be as cold as –10 °C for cold-start work and as hot as +80 °C during extended runs, so machines can function in broad ambient conditions. Drive design must supply up to 100 Nm to the cylindrical shaft E, enabling the pump to reach rated pressure without slip. Discharge occurs through a DN13 (SAE 1/2 in) pressure port that matches the DN13 suction port, keeping hose and flange sizes uniform on both sides of the housing. The identical port dimension simplifies inventory and reduces restriction at maximum flow, supporting reliable delivery to downstream circuits.
Technical Specifications
Continuous Pressure (mineral Oil)
315 bar
Direction Of Rotation
Clockwise
Displacement
8.2 cm³/rev
Flow @1450 Rpm (10 Bar; 46 Mm²/s)
11.8 L/min
Fluid Temp Max (mineral Oil)
+80 °C
Fluid Temp Min (mineral Oil)
-10 °C
Inlet Pressure Min (abs)
0.8 bar
Intermittent Pressure (mineral Oil)
350 bar
Line Connection
SAE Flange (ISO 6162-1)
Max Drive Torque (cyl. Shaft E)
100 Nm
Max Speed
3000 rpm
Min Speed
600 rpm
Pressure Port Size
DN13 (SAE 1/2 in)
Seals
FKM
Suction Port Size
DN13 (SAE 1/2 in)
1620 Old Apex Road
Shipping & Payment Options
