Bosch Rexroth | PGH2-2X006RR07VU2
PGH2-2X/006RR07VU2
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGH2-2X/006RR07VU2 hydraulic pump is manufactured by Bosch Rexroth in the PGH High Pressure Gear Pumps series. It delivers 6.5 cm³ per revolution, a displacement suited to compact circuits that demand precise flow control for automation tasks. The shaft turns clockwise, so drive orientation must match this direction. Stable operation begins at 600 rpm, allowing low-speed duty without flow pulsation, while a measured delivery of 9.3 l/min at 1450 rpm and 10 bar provides a reference point for sizing system components. Installation uses a 2-hole ISO 3019-1 mounting flange, and the 82.55 mm h8 pilot centers the housing for accurate alignment with motor faces. A DN13 SAE 1/2″ suction port accepts standard return-line plumbing to minimize inlet losses, and FKM shaft seals contain high-temperature hydraulic oil without premature wear.
For continuous service the pump tolerates 315 bar, giving designers a high working pressure margin for servo actuators and clamping circuits. Short overloads may reach 350 bar, but exposure must be intermittent to prevent gear fatigue. Mechanical input is limited to 80 Nm on the splined R shaft, ensuring the driving motor is not oversized, and 75 Nm can be passed through the output side when the unit is used in a tandem arrangement. Maximum speed is 3000 rpm, so flow can be increased when faster cycle times are required provided viscosity remains within limits. A DN13 SAE 1/2″ pressure port delivers the pumped fluid to downstream valves, and a total mass of 4.4 kg keeps handling straightforward during maintenance or manifold assembly.
Technical Specifications
Continuous Operating Pressure
315 bar
Direction Of Rotation
Clockwise
Displacement
6.5 cm3/rev
Flange Pilot Diameter
82.55 mm (h8)
Flow At 1450 Rpm (10 Bar, 46 Mm2/s)
9.3 l/min
Max Drive Torque (splined R)
80 Nm
Max Operating Pressure (intermittent)
350 bar
Max Output Torque (through-drive)
75 Nm
Max Speed
3000 rpm
Min Speed
600 rpm
Mounting Flange
2-Hole (ISO 3019-1)
Pressure Port
DN13 (SAE 1/2")
Seal Material
FKM
Suction Port
DN13 (SAE 1/2")
Weight
4.4 kg
1620 Old Apex Road
Shipping & Payment Options
