Bosch Rexroth | P2GH5125GF3032RE1107U2
P2GH5/125+GF3/032RE11+07U2
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The P2GH5/125+GF3/032RE11+07U2 pump belongs to the PGH High Pressure Gear Pumps series and is produced by Bosch Rexroth. It supplies hydraulic circuits with fixed-displacement flow for industrial automation. The first stage displaces 5.24 cm³ per revolution, so each rotation moves a measured volume of fluid. At 1450 rpm under 10 bar, the unit delivers 7.5 l/min, which provides a reference point for sizing the drive motor. It sustains a continuous operating pressure of 315 bar, while short load peaks up to 350 bar are admissible without damage. The pumping element can run up to 3000 rpm for high-speed duty and remains stable down to 600 rpm when low flow is required. A clockwise direction of rotation is specified, and power is introduced through a cylindrical drive shaft identified by code E.
System cleanliness must reach ISO 4406 class 20/18/15 to protect internal surfaces from abrasive wear. The inlet circuit tolerates absolute pressures between 0.8 and 2 bar, ensuring adequate filling without cavitation. Fluid exits through a DN13 SAE 1/2-inch pressure port and enters through an identical DN13 SAE 1/2-inch suction port to standardize hose selection. Pressure and suction connectors are formed on an SAE flange identified by code 07, and the housing attaches to machinery with a 2-hole mounting flange labeled U2. Shipping mass is 4.3 kg, allowing single-person handling during assembly.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Direction Of Rotation
Clockwise (R)
Drive Shaft (stage 1)
Cylindrical (E)
Line Connection (stage 1)
SAE Flange (07)
Mounting Flange
2-Hole (U2)
Stage 1 Continuous Pressure
315 bar
Stage 1 Displacement
5.24 cm³/rev
Stage 1 Flow @1450 Rpm, 10 Bar
7.5 l/min
Stage 1 Inlet Pressure Max (abs)
2 bar
Stage 1 Inlet Pressure Min (abs)
0.8 bar
Stage 1 Max Intermittent Pressure
350 bar
Stage 1 Max Speed
3000 rpm
Stage 1 Min Speed
600 rpm
Stage 1 Pressure Port
DN13 (SAE 1/2")
Stage 1 Suction Port
DN13 (SAE 1/2")
Stage 1 Weight
4.3 kg
1620 Old Apex Road
Shipping & Payment Options
