Bosch Rexroth | PGF2-2X013RE01VE4
PGF2-2X/013RE01VE4
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF2-2X/013RE01VE4 internal gear pump is manufactured by Bosch Rexroth for the PGF Internal Gear Pumps series and supplies hydraulic power in automated equipment. Its displacement of 13.3 cm³ per revolution determines the volume moved with each shaft turn, while a flow of 19.3 L/min at 10 bar and 1450 rpm meets the needs of moderate-duty circuits. Continuous service is supported at 210 bar operating pressure, allowing the pump to drive cylinders and motors without oversizing. Rotation is fixed to the right (clockwise) so motor orientation is predefined during installation. A speed range from 600 rpm to 3600 rpm permits pairing with variable-frequency drives for broad operating envelopes. The shaft follows the ISO 3019-2 E20N specification and measures 20 mm in diameter, giving direct compatibility with standardized couplings.
The housing mounts on an ISO 3019-2 80B4HW flange so drop-in replacement is simple in power units that follow this footprint. Short pressure spikes are tolerated up to 250 bar, protecting the pump when directional valves shift. A low moment of inertia of 0.00014 kg·m² reduces starting torque, which eases load on electric motors during acceleration. Fluid enters through a G 3/4 BSPP suction port and exits through a G 1/2 BSPP pressure port, keeping pipe selection straightforward. An FKM shaft seal withstands hydraulic oil and elevated temperatures to limit leakage over long duty cycles. These design details make the unit suitable for compact power packs and servo-controlled machines that demand consistent pressure and quick response.
Technical Specifications
Displacement
13.3 cm3/rev
Drive Shaft Standard
ISO 3019-2 E20N
Max Flow (10 Bar, 1450 Rpm)
19.3 L/min
Max Operating Pressure
210 bar
Max Speed
3600 rpm
Min Speed
600 rpm
Moment Of Inertia
0.00014 kg m^2
Mounting Flange
ISO 3019-2 (80B4HW)
Pressure Peak
250 bar
Pressure Port
G 1/2 (BSPP)
Rotation Direction
Right (clockwise)
Shaft Diameter
20 mm
Shaft Seal
FKM
Suction Port
G 3/4 (BSPP)
1620 Old Apex Road
Shipping & Payment Options
