Bosch Rexroth | PGF2-2X011RL01VM
PGF2-2X/011RL01VM
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF2-2X/011RL01VM internal gear pump belongs to the PGF Internal Gear Pumps series and is manufactured by Bosch Rexroth. It converts mechanical drive power into hydraulic flow for automated circuits. A displacement of 11.0 cm³ per revolution defines the volume transferred each shaft turn, while a rated flow of 16 L/min is reached at 1450 rpm under 10 bar. Continuous duty is supported up to 210 bar, and the design tolerates pressure peaks of 250 bar for short durations. The shaft can spin up to 3600 rpm, and the direction of rotation is clockwise, so drive orientation must follow that convention. Installation is carried out through a 2-hole pattern with a centering diameter of 52 mm that aligns the housing to the machine interface. Down-stream plumbing attaches to a G 1/2 port that matches ISO 228-1 threads, streamlining connection to common pressure lines.
A minimum speed of 600 rpm is required to maintain internal lubrication, and a moment of inertia of 0.00012 kg·m² reduces load on the prime mover during acceleration ramps. Starting is permitted with fluid viscosities up to 2000 mm²/s, which accommodates cold-oil conditions typical at plant startup. System cleanliness must meet ISO 4406 code 20/18/15 to protect the gear set from abrasive wear. The suction side interfaces with a G 3/4 thread in accordance with ISO 228-1, providing a larger passage for low-pressure intake flow. An FKM seal set resists higher temperatures and a broad range of hydraulic fluids, increasing service life. The complete unit weighs 4.5 kg, allowing manual handling during installation or replacement without lifting aids.
Technical Specifications
Admissible Start Viscosity
2000 mm²/s
Cleanliness Class
ISO 4406 20/18/15
Direction Of Rotation
Clockwise
Displacement
11.0 cm³/rev
Mass
4.5 kg
Max Flow (1450 Rpm, 10 Bar)
16 L/min
Max Operating Pressure
210 bar
Max Speed
3600 rpm
Min Speed
600 rpm
Moment Of Inertia
0.00012 kg·m²
Mounting
2-Hole, Centering Ø52 mm
Pressure Peak
250 bar
Pressure Port Thread
G 1/2 (ISO 228-1)
Seal Material
FKM
Suction Port Thread
G 3/4 (ISO 228-1)
1620 Old Apex Road
Shipping & Payment Options
