Bosch Rexroth | PGF2-2X011RJ01VU2
PGF2-2X/011RJ01VU2
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF2-2X/011RJ01VU2 pump is part of the PGF Internal Gear Pumps series produced by Bosch Rexroth. It supplies hydraulic automation circuits with a displacement of 11.0 cm³ per revolution so that a predictable volume is delivered in every cycle. Operating between 600 and 3600 rpm, the unit covers a broad speed range for both low-speed positioning and high-speed actuation. Clockwise rotation suits common motor drives chosen for right-hand mounting. At 10 bar and 1450 rpm the pump provides a maximum flow of 16 L per minute, supporting compact power units. It processes HL or HLP fluids specified in DIN 51524 and maintains performance when viscosity stays between 10 and 300 mm²/s. The permissible fluid temperature extends from −20 °C to +100 °C so cold-start and elevated-temperature duty are both possible. Cleanliness requirements follow ISO 4406 code 20/18/15, establishing the filtration level needed for reliable service.
The housing and drive side withstand a continuous operating pressure of 210 bar, while brief transients can reach a 250 bar peak without damage. Connection to prime movers is handled by a 9-tooth 16/32DP shaft spline defined in ISO 3019-1, and the casing bolts to an ISO 3019-1 82-2 mounting flange for standardized interchangeability. The pressure port carries a G 1/2 thread conforming to ISO 228-1, and the suction port is tapped G 3/4 to the same standard, allowing straightforward tube or hose fittings. Internal sealing elements are made from FKM to tolerate the stated temperature and fluid limits. Each of these interface features supports quick installation and safe operation when the pump delivers oil to presses, machine tools, or other hydraulic assemblies that demand stable flow under high pressure.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Displacement
11.0 cm3/rev
Fluid Temperature Range
-20 to +100 °C
Hydraulic Fluid
HL/HLP to DIN 51524
Max Flow (10 Bar, 1450 Rpm)
16 L/min
Max Operating Pressure
210 bar
Mounting Flange
ISO 3019-1 82-2
Pressure Peak
250 bar
Pressure Port Thread
G 1/2 (ISO 228-1)
Rotation Direction
Clockwise
Seal Material
FKM
Shaft Spline
9T 16/32DP (ISO 3019-1)
Speed Range
600 to 3600 rpm
Suction Port Thread
G 3/4 (ISO 228-1)
Viscosity Range
10 to 300 mm²/s
1620 Old Apex Road
Shipping & Payment Options
