Bosch Rexroth | PGF2-2X008RL01VM
PGF2-2X/008RL01VM
Request a Quote
Available, Ships in 1-2 weeks
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF2-2X/008RL01VM is an internal gear pump in the PGF Internal Gear Pumps series and is built by Bosch Rexroth for compact hydraulic power units. Its displacement is 8.2 cm³ per revolution so each shaft turn moves a fixed oil volume that defines basic flow capability. The specified clockwise direction of rotation matches common electric motor layouts and avoids reverse loading on the gear set. A permissible speed up to 3000 rpm lets the pump support variable-speed drives without exceeding bearing limits. At a reference point of 1450 rpm and 10 bar, it delivers 11.9 L/min, giving designers a reliable flow figure for circuit sizing. The continuous operating pressure reaches 210 bar, while a peak rating of 250 bar accepts short transient spikes that occur during rapid actuator stops. A 2-face driver with through-drive shaft end allows another pump to be mounted in series, saving space when multiple flows are required. FKM seals are fitted to withstand mineral oil and elevated temperatures encountered in industrial hydraulic fluid service.
Installation parameters focus on accurate alignment and secure piping. A centering diameter of 52 mm seats the housing precisely on the mounting surface to keep shaft concentricity. The 2-hole attachment pattern streamlines fastening, and M8 bolts provide the clamping force needed to resist pressure reaction loads. The suction port uses a G 3/4 thread, while the pressure port uses a G 1/2 thread; both follow the ISO 228-1 BSPP standard so standard tube fittings can be selected without adapters. An absolute suction side limit of 3 bar protects the pump from inlet overpressure and reduces the risk of aeration. Overall mass is 2.2 kg, which eases manual handling when the unit is installed on small power packs or test rigs.
Technical Specifications
Centering Diameter
52 mm
Direction Of Rotation
Clockwise
Displacement
8.2 cm3/rev
Flow At 1450 Rpm (10 Bar)
11.9 L/min
Mass
2.2 kg
Max Operating Pressure
210 bar
Max Speed
3000 rpm
Max Suction Pressure (absolute)
3 bar
Mounting Bolt Size
M8
Mounting Type
2-Hole Attachment
Port Thread Standard
ISO 228-1 (BSPP)
Pressure Peak
250 bar
Pressure Port Thread
G 1/2
Seal Material
FKM
Shaft End Form
2-Face Driver With Through-Drive
Suction Port Thread
G 3/4
1620 Old Apex Road
Shipping & Payment Options
