Bosch Rexroth | PGF2-2X008RE01VE4
PGF2-2X/008RE01VE4
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF2-2X/008RE01VE4 pump is produced by Bosch Rexroth for the PGF Internal Gear Pumps series and supplies hydraulic automation systems with fixed-volume flow. It displaces 8.2 cm³ each revolution and reaches 11.9 l/min at 1450 rpm, supporting moderate actuator speeds without oversizing the power unit. Clockwise rotation is required, so drive shafts must follow the same direction. An E4 mounting flange compliant with ISO 3019-2 size 80B4HW allows direct coupling to standard motors, while a B6 × 6 × 25 key under DIN 6885 locks the shaft in place. The pressure outlet is threaded G 1/2 per ISO 228-1, and the suction inlet uses a G 3/4 thread for straightforward hose connection. Unit mass is 4.2 kg, which eases handling during installation or service.
The pump sustains a continuous pressure of 210 bar and withstands brief peaks to 250 bar, enabling use in clamping, feed, or steering circuits that experience intermittent overloads. Suction conditions can vary between 0.6 bar absolute and 3 bar, so designers may position the reservoir above or below the pump without risking cavitation. A minimum drive speed of 600 rpm keeps internal lubrication effective, whereas faster operation is unrestricted within rated flow limits. The rotating group carries a moment of inertia of 0.000090 kg·m², allowing rapid acceleration when the electric motor starts or changes speed. These pressure, suction, and dynamic values guide system engineers in matching the PGF2-2X/008RE01VE4 to hydraulic circuits that demand reliable, compact gear pumping.
Technical Specifications
Displacement
8.2 cm³/rev
Key Size
B6 x 6 x 25 (DIN 6885)
Mass
4.2 kg
Max Operating Pressure
210 bar
Maximum Flow (1450 Rpm)
11.9 l/min
Maximum Suction Pressure
3 bar
Minimum Speed
600 rpm
Minimum Suction Pressure
0.6 bar
Moment Of Inertia
0.000090 kg·m²
Mounting Flange
E4 (ISO 3019-2, 80B4HW)
Pressure Peak
250 bar
Pressure Port Thread
G 1/2 (ISO 228-1)
Rotation Direction
Clockwise
Suction Port Thread
G 3/4 (ISO 228-1)
1620 Old Apex Road
Shipping & Payment Options
