Bosch Rexroth | PGF2-2X008LL01VM
PGF2-2X/008LL01VM
Request a Quote
Call for Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF2-2X/008LL01VM pump belongs to the PGF Internal Gear Pumps series manufactured by Bosch Rexroth for hydraulic automation circuits that demand consistent flow. It provides a fixed displacement of 8.2 cm³ per revolution, permitting predictable volumetric delivery to manifold systems. The shaft is set for left, counter-clockwise rotation, establishing correct orientation when coupled to a drive motor. At 1450 rpm the unit supplies 11.9 L/min, meeting the requirements of moderate-duty actuators, and it can start smoothly from 600 rpm without cavitation. A 2-hole mounting layout with a 52 mm centering diameter aligns the housing precisely, while flange bolts must be tightened to 25 Nm to hold the pump securely against vibration.
The housing tolerates a continuous 210 bar operating pressure and can accommodate peaks up to 250 bar during short load spikes. Pressure discharge uses a G 1/2 BSPP port for straightforward pipework, whereas the suction line attaches to a G 3/4 BSPP port to reduce inlet velocity. An FKM seal resists mineral oils and many synthetic fluids, allowing operation at elevated oil temperatures common in industrial presses. The rotating group carries a moment of inertia of 0.000090 kg·m², enabling quick speed changes when driven by variable-speed motors. With a total mass of 4.2 kg the pump can be installed or replaced by a single technician, completing a compact solution for fixed-displacement hydraulic power units.
Technical Specifications
Direction Of Rotation
Left (Counterclockwise)
Displacement
8.2 cm3/rev
Mass
4.2 kg
Max Flow (1450 Rpm)
11.9 L/min
Maximum Operating Pressure
210 bar
Minimum Speed
600 rpm
Moment Of Inertia
0.000090 kg m2
Mounting Bolt Torque
25 Nm
Mounting Centering Diameter
52 mm
Mounting Type
2-Hole Mounting
Pressure Peak
250 bar
Pressure Port Thread (bspp)
G 1/2
Seal Material
FKM
Suction Port Thread (bspp)
G 3/4
1620 Old Apex Road
Shipping & Payment Options
