Bosch Rexroth | PGF2-2X006RJ01VU2
PGF2-2X/006RJ01VU2
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF2-2X/006RJ01VU2 unit is produced by Bosch Rexroth for the PGF Internal Gear Pumps series and is intended for hydraulic automation loops where constant fluid delivery is required. It moves oil with a displacement of 6.5 cm³ per revolution so flow rises linearly with shaft speed. The clockwise rotation identifies correct motor coupling and port arrangement in unidirectional circuits. A minimum speed of 600 rpm prevents cavitation during light loads, while a rated flow of 9.4 L/min at 1450 rpm and 10 bar covers moderate actuator demands. Continuous operation is supported up to 210 bar, enabling sustained high-pressure work cycles. An ISO 3019-1 82-2 two-hole mounting flange simplifies attachment to standard pump brackets, and BSP porting under ISO 228-1 allows direct connection to common pipe fittings.
The model accepts short pressure spikes to 250 bar, safeguarding the system during rapid load changes. Discharge is routed through a G 1/2 thread 14 mm deep to limit pressure loss, while suction enters via a G 3/4 thread 16 mm deep to maintain low inlet velocity. An 82.55 mm h8 centering diameter keeps the housing concentric with the drive face and reduces shaft misalignment. The mass of 2.1 kg permits single-person handling during installation. FKM seals resist mineral oils and elevated temperatures, extending service intervals. Torque is transmitted through an SAE J498b spline with 9 teeth, 16/32 DP, and a 30° pressure angle, ensuring positive engagement with standard hydraulic prime movers.
Technical Specifications
Centering Diameter
82.55 mm (h8)
Direction Of Rotation
Clockwise
Displacement
6.5 cm3/rev
Flow At 1450 Rpm (10 Bar)
9.4 L/min
Mass
2.1 kg
Maximum Continuous Pressure
210 bar
Maximum Intermittent Pressure
250 bar
Minimum Speed
600 rpm
Mounting Flange
ISO 3019-1 82-2 (SAE 2-Hole)
Port Standard
BSP (ISO 228-1)
Pressure Port Thread
G 1/2 (14 mm depth)
Seal Material
FKM
Spline Specification
SAE J498b 9T 16/32DP 30°
Suction Port Thread
G 3/4 (16 mm depth)
1620 Old Apex Road
Shipping & Payment Options
