Bosch Rexroth | PGF2-2X006RE20VE4
PGF2-2X/006RE20VE4
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF2-2X/006RE20VE4 pump is part of the PGF Internal Gear Pumps series from Bosch Rexroth and is used to deliver pressurized oil to hydraulic actuators in automated machinery. Its geometric displacement is 6.5 cm³ per revolution, allowing a volumetric flow of 9.4 L/min when it runs at 1450 rpm under a system pressure of 10 bar. The unit is configured for clockwise rotation, and it maintains stable lubrication as low as 600 rpm, which defines the minimum operating speed. A rated continuous pressure limit of 210 bar supports long-term duty, while a 250 bar intermittent rating provides short overload capability during rapid cycle demands. Mounting is completed through an ISO 3019-2 80B4HW flange that aligns the housing with standard motor adaptors.
Hydraulic connections are made with a square flange conforming to DIN 3901/3902, and torque is transmitted through a DIN 6885 B6 × 6 × 25 key that mates the shaft to the prime mover. The assembled pump weighs 2.1 kg, so installation can be managed without lifting equipment. Shaft E tolerates a drive torque up to 140 Nm, matching the pressure ratings given earlier. Suction conditions permit absolute inlet pressures between 0.6 bar and 3 bar, enabling operation on reservoirs positioned below or above the pump centerline. Drive power at zero differential pressure is 0.75 kW, indicating modest energy demand during priming and low-load operation.
Technical Specifications
Connection Type
Square Flange (DIN 3901/3902)
Displacement
6.5 cm3/rev
Fitting Key
DIN 6885 B6 x 6 x 25
Flow @1450 Rpm, 10 Bar
9.4 L/min
Mass
2.1 kg
Max Continuous Pressure
210 bar
Max Drive Torque (shaft E)
140 Nm
Max Intermittent Pressure
250 bar
Maximum Inlet Pressure (abs)
3 bar
Min Drive Power (Δp=0)
0.75 kW
Minimum Inlet Pressure (abs)
0.6 bar
Minimum Speed
600 rpm
Mounting Flange
ISO 3019-2 80B4HW
Rotation Direction
Clockwise
1620 Old Apex Road
Shipping & Payment Options
