Bosch Rexroth | PGF2-2X006RA01VP2
PGF2-2X/006RA01VP2
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF2-2X/006RA01VP2 is produced by Bosch Rexroth as part of the PGF Internal Gear Pumps series and is used to move hydraulic oil in automation systems. Its displacement is 6.5 cm³ per revolution, so each shaft turn delivers a defined volume for predictable actuator movement. A minimum speed of 600 rpm keeps the internal chambers lubricated and prevents volumetric loss at low drive speeds. When driven at 1450 rpm and 10 bar it supplies 9.4 L/min, providing a baseline flow figure for sizing downstream components. Clockwise rotation establishes the correct installation orientation for coupling with standard electric motors. The pump operates continuously up to 210 bar, supporting medium-pressure circuits that run for long durations. It tolerates 250 bar during brief transients, and its moment of inertia of 0.000074 kg·m² limits acceleration torque on the prime mover.
The inlet side must stay above 0.6 bar absolute to avoid cavitation, while a 3 bar absolute ceiling prevents seal overload from excess feed pressure. A maximum start-up viscosity of 2000 mm²/s lets the unit handle cold oil without scuffing its gear surfaces. Hydraulic fluid temperature can reach +100 °C, so the unit can tolerate elevated heat in continuous service. Pressure discharge uses a G 1/2 (ISO 228-1) thread, giving a standardized port for connecting rigid or flexible lines. Suction flow enters through a larger G 3/4 (ISO 228-1) thread to reduce velocity losses and maintain inlet stability. The assembly weighs 2.1 kg, making it light enough for direct mounting on compact power packs.
Technical Specifications
Continuous Pressure
210 bar
Displacement
6.5 cm³
Flow At 1450 Rpm (10 Bar)
9.4 L/min
Hydraulic Fluid Temp Max
+100 °C
Inlet Pressure Max (abs)
3 bar
Inlet Pressure Min (abs)
0.6 bar
Minimum Speed
600 rpm
Moment Of Inertia
0.000074 kg·m²
Pressure Peak
250 bar
Pressure Port Thread
G 1/2 (ISO 228-1)
Rotation
Clockwise
Start Viscosity Max
2000 mm²/s
Suction Port Thread
G 3/4 (ISO 228-1)
Weight
2.1 kg
1620 Old Apex Road
Shipping & Payment Options
