Bosch Rexroth | PGF1-2X5-0LL01VM
PGF1-2X/5 0LL01VM
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF1-2X/5 0LL01VM internal gear pump is produced by Bosch Rexroth for the PGF Internal Gear Pumps series and supplies hydraulic energy to automated machinery that relies on steady, low-noise flow. A displacement of 5.0 cm³ per revolution sets the volume transferred each shaft turn, while a nominal flow of 7.2 L/min at 1450 rpm establishes predictable circuit throughput. Operating speed can be reduced to 600 rpm for slow duty cycles or raised to 3600 rpm when higher flow is required. The shaft rotates to the left (counterclockwise), so the driving motor must follow the same direction. Installation is handled by a two-hole mounting pattern with a 32 mm diameter, the pressure port uses a G 3/8 thread, and the suction side is tapped G 1/2 to limit inlet losses and prevent cavitation.
The pump maintains a continuous outlet pressure of 180 bar with an intermittent limit of 210 bar, giving actuators headroom for brief load peaks without exceeding component strength. A maximum drive torque of 14 Nm guides motor sizing and guards the gear set against overload. Hydraulic fluid temperatures can range from -20 °C to 100 °C, allowing cold starts and high-temperature operation in enclosed power packs. Compatibility with HL or HLP fluids to DIN 51524 ensures adequate lubrication and corrosion resistance. An FKM seal set withstands mineral oil and elevated temperatures, keeping leakage under control throughout the stated pressure range. These characteristics suit the PGF1-2X/5 0LL01VM to compact power units and machine tools that demand stable flow and moderate pressure across variable duty cycles.
Technical Specifications
Continuous Outlet Pressure
180 bar
Direction Of Rotation
Left (Counterclockwise)
Displacement
5.0 cm³/rev
Fluid Temp Max
100 °C
Fluid Temp Min
-20 °C
Hydraulic Fluid
HL/HLP To DIN 51524
Intermittent Outlet Pressure
210 bar
Max Drive Torque
14 Nm
Max Speed
3600 rpm
Min Speed
600 rpm
Mounting
2-Hole Mounting (Ø 32 mm)
Nominal Flow (n=1450 Rpm)
7.2 L/min
Pressure Port Thread
G 3/8
Seal Material
FKM
Suction Port Thread
G 1/2
1620 Old Apex Road
Shipping & Payment Options
