Bosch Rexroth | PGF1-2X2-2RN01VM
PGF1-2X/2 2RN01VM
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PGF1-2X/2 2RN01VM pump belongs to the PGF Internal Gear Pumps series and is manufactured by Bosch Rexroth for hydraulic automation circuits that require stable flow from a compact unit. It uses an internal gear, fixed displacement design, so every revolution moves 2.2 cm³ of fluid and delivers a predictable volume across the working range. The pump is built for clockwise rotation, which determines drive orientation inside power packs. It can operate from 600 to 3600 revolutions per minute, allowing integration with slow-speed electric motors as well as faster spindle drives. A two-flats shaft sized for a claw coupling transfers torque without keyways, while an FKM seal contains the fluid and resists common hydraulic oils. Connection to the reservoir is made through a G 1/4 suction port, and the assembly weighs 0.9 kg, reducing load on small manifolds.
For pressure delivery, the unit sustains 210 bar continuously and accepts intermittent peaks up to 250 bar, enabling use in machines that cycle between holding and rapid stroke phases. The drive must supply no more than 14 Nm, matching the gear set and bearing limits. Mechanical attachment follows a 2-hole pattern with a 32 mm centering diameter, and the mounting screws are tightened to 25 Nm using M8 DIN 912 bolts to secure alignment. Discharge is routed through a G 1/4 port that matches common manifold blocks, simplifying plumbing. These installation and load parameters complete the pump’s envelope and ensure reliable service within the rated hydraulic pressure range.
Technical Specifications
Direction Of Rotation
Clockwise
Geometric Displacement
2.2 cm3/rev
Max Continuous Pressure
210 bar
Max Drive Torque
14 Nm
Max Intermittent Pressure
250 bar
Max Speed
3600 min-1
Min Speed
600 min-1
Mounting Screw Torque
25 Nm (M8 DIN 912)
Mounting Type
2-Hole (Centering Ø32 mm)
Pressure Port Thread
G 1/4 (ISO 228-1)
Pump Design
Internal Gear, Fixed Displacement
Seal Material
FKM
Shaft End Type
Two Flats (Claw Coupling)
Suction Port Thread
G 1/4 (ISO 228-1)
Weight
0.9 kg
1620 Old Apex Road
Shipping & Payment Options
