Bosch Rexroth | MV037-D2-2S-020-30-T1-TVD-127
MV037-D2-2S-020-30-T1-TVD-127
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The MV037-D2-2S-020-30-T1-TVD-127 hydraulic motor is part of the MV Rineer High Torque Vane Motors series from Bosch Rexroth. It converts fluid energy into rotation for mobile machinery and fixed automation that require consistent high torque. A displacement of 20 in³ per revolution (328 cc per revolution) establishes the flow needed to reach rated speed. The motor sustains a continuous pressure of 4500 psi (310 bar) so circuit relief valves can be set near this level without derating. A continuous speed limit of 1000 rpm defines the highest stable running velocity during steady operation. At a 4500 psi differential it delivers 1104 lb-ft (1497 Nm) of torque, providing strong output for swing, propel, or winch duties. The T1 bearing arrangement supports radial and axial loads while keeping the rotor aligned. A TCN radial lip shaft seal restricts external leakage, and a 1-1/4 in four-bolt flange with two ports simplifies hose attachment.
For short duty peaks the motor accepts an intermittent pressure of 5000 psi (345 bar) to accommodate transient loads. An intermittent speed capability of 1200 rpm allows brief accelerations without compromising durability. The mounting pilot diameter is 6.500 in (165.1 mm) to center the housing accurately on the machine interface. A bolt circle of 6.38 in (161.93 mm) and four 1/2-13 UNC threaded holes secure the unit against reaction torque. FKM (Viton) O-rings seal the main body joints to resist high-temperature hydraulic fluids. Disogrin O-rings are fitted in the pedestal area to maintain low leakage under pressure cycling. With a weight of 100 lb (45 kg) the motor can be handled with standard lifting equipment during installation.
Technical Specifications
Bearing Type
T1
Continuous Pressure
4500 psi (310 bar)
Continuous Speed
1000 rpm
Displacement
20 in3/rev (328 cc/rev)
Intermittent Pressure
5000 psi (345 bar)
Intermittent Speed
1200 rpm
Main Body O-rings
FKM (Viton)
Mounting Bolt Circle
6.38 in (161.93 mm)
Mounting Holes
4x 1/2-13 UNC
Mounting Pilot Diameter
6.500 in (165.1 mm)
Pedestal O-rings
Disogrin
Port Type
1-1/4 in 4-bolt flange (2-port)
Shaft Seal
TCN radial lip
Torque @ 4500 Psid
1104 lb-ft (1497 Nm)
Weight
100 lb (45 kg)
1620 Old Apex Road
Shipping & Payment Options
