Bosch Rexroth | MV015-61-1S-006-31-B1-QB-000
MV015-61-1S-006-31-B1-QB-000
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The MV015-61-1S-006-31-B1-QB-000 hydraulic motor is built by Bosch Rexroth within the MV Rineer High Torque Vane Motors series. It supplies rotary output for hydraulic automation where compact size and constant torque are required. The unit displaces 6.0 in³ per revolution (98 cc/rev), which sets the flow rate needed from the pump. A maximum continuous speed of 2000 rpm allows the motor to drive machinery without exceeding internal bearing limits. The design tolerates up to 3000 psi (207 bar) operating pressure, so it can deliver full torque in high-pressure circuits. Rated power reaches 150 hp (112 kW), aligning the motor with medium-to-high power hydraulic drives. Installation is handled through an SAE J744 127-4 mounting flange, and the 127.00 mm (5.000 in) pilot diameter centers the motor precisely on the mating bracket.
Fluid connections and shaft data of the MV015-61-1S-006-31-B1-QB-000 support reliable integration into hydraulic systems. Two working ports are provided in a single rotating group, and each uses a 1-1/4 in four-bolt flange to maintain sealing at rated pressure. Main body sealing is achieved with NBR (Buna) O-rings, while the shaft is protected by a quad ring seal to reduce leakage during extended duty cycles. The output shaft measures 31.75 mm (1.250 in) in diameter and complies with SAE J744 32-4, employing a 14-tooth spline cut to 12/24 DP with a 30° pressure angle. This spline follows ANSI B92.1-1996 Class 7 accuracy and uses a flat root side fit to ensure smooth torque transfer into the driven component without excessive backlash.
Technical Specifications
Displacement
6.0 in3/rev (98 cc/rev)
Main Body O-rings
NBR (Buna)
Max Continuous Speed
2000 rpm
Max Operating Pressure
3000 psi (207 bar)
Max Power
150 hp (112 kW)
Mounting Flange
SAE J744 127-4
Pilot Diameter
127.00 mm (5.000 in)
Port Size
1-1/4 in 4-bolt flanges
Ports
2-Port (Single Rotating Group)
Shaft Diameter
31.75 mm (1.250 in)
Shaft Seal
Quad Ring
Shaft Spline
14T, 12/24 DP, 30° PA
Shaft Standard
SAE J744 32-4
Spline Class
ANSI B92.1-1996 Class 7
Spline Fit
Flat Root Side Fit
1620 Old Apex Road
Shipping & Payment Options
