Bosch Rexroth | MPGB75HTYZ4DEOFS1AZPF12008K1NN
MPGB7.5HTYZ4DEOFS1AZPF12008K1NN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The MPGB7.5HTYZ4DEOFS1AZPF12008K1NN motor pump belongs to the MPGB-AZPF Close-Coupled Motor Pumps series from Bosch Rexroth and supplies hydraulic power in compact automation skids. A 7.5 HP induction motor drives the unit, providing mechanical energy for pressure generation. Base speeds are 1450 rpm at 50 Hz and 1750 rpm at 60 Hz, so the shaft can match global mains frequencies without gearing changes. The motor uses four poles to keep torque smooth across its operating range. Standard efficiency indicates a conventional electrical-to-mechanical conversion rate suitable for general duty. The 213TYZ frame sets the mounting footprint, helping designers align bolt patterns with existing panels. A full-voltage winding lets the motor start directly across the line, eliminating soft-start hardware. The junction box sits in the F1 position to give wiring access from one side of the housing, and the absence of mounting rails makes the pump fasten directly to the adapter plate, shortening overall length.
Pump displacement is 0.49 in³/rev (8 cc/rev), defining the oil volume delivered during each shaft revolution. At rated speed this geometry yields a maximum flow of 3.8 gpm (14.4 L/min) for cylinder or motor circuits that need a steady supply. The assembly supports system pressures up to 3970 psi (274 bar) at full flow, allowing it to drive high-force actuators without oversizing components. Pressure fluid exits through an SAE-10 7/8-14 UNF-2B port so standard hose ends can be attached quickly. Suction fluid enters via an SAE-12 1-1/16-12 UN-2B port, and the down orientation lets oil gravitate into the inlet to reduce the chance of cavitation. The combination of flow capacity, pressure rating, and straightforward porting integrates the unit cleanly into industrial hydraulic reservoirs.
Technical Specifications
Base Speed (50 Hz)
1450 rpm
Base Speed (60 Hz)
1750 rpm
Horsepower
7.5 HP
Junction Box Location
F1
Max Flow
3.8 gpm (14.4 L/min)
Max Pressure At Full Flow (7.5 Hp)
3970 psi (274 bar)
Motor Efficiency
Standard
Motor Frame
213TYZ
Motor Winding Type
Full Voltage
Mounting Rails
None
Number Of Poles
4
Pressure Port
SAE -10 (7/8-14 UNF-2B)
Pump Displacement
0.49 in³/rev (8 cc/rev)
Suction Port
SAE -12 (1-1/16-12 UN-2B)
Suction Port Orientation
Down
1620 Old Apex Road
Shipping & Payment Options
