MPGB010HTYZ4DEOFS1AZPF12011K1NN

The MPGB010HTYZ4DEOFS1AZPF12011K1NN is a close-coupled motor pump in the MPGB-AZPF Close-Coupled Motor Pumps series from Bosch Rexroth. It supplies hydraulic power for automated machinery by combining a fixed displacement pump with an integral electric motor on a common shaft. The pump displacement is 0.67 in³ per revolution (11 cc/rev), so each shaft rotation moves a consistent oil volume suited for circuits that need steady flow. With a motor rating of 10 HP, the unit can drive the pump without overload during continuous duty. When connected to a 50 Hz supply the motor turns at 1450 rpm, and at 60 Hz it reaches 1750 rpm, giving the pump predictable output across global power grids. These speeds allow the pump to deliver a maximum flow of 5.2 gpm (19.8 L/min). A pressure port threaded for SAE -10 (7/8-14 UNF-2B) fittings simplifies connection to downstream manifolds while maintaining safe sealing integrity.

The hydraulic circuit can operate up to 3850 psi (265 bar) at full flow, enabling the assembly to serve presses, clamps, or motion axes that demand high working pressure. Suction oil enters through an SAE -12 (1-1/16-12 UN-2B) port that faces downward in line with the pump body, which reduces piping elbows and keeps inlet conditions stable. Because the design omits mounting rails, the pump-motor set bolts directly to a base plate or reservoir lid, minimizing footprint and vibration paths. An overall length of 19.59 in supports installation inside compact power units, and a total weight of 194 lb reflects the combined mass of the cast pump, steel motor, and coupling. The motor frame size 215TYZ defines the bolt pattern and shaft height, letting designers match the unit to standard NEMA adapters. Altogether, these characteristics allow the unit to provide reliable pressure and flow for automated hydraulic systems without additional external alignment hardware.