MPGB005HTYZ4DEOFS1AZPF12016K1NN

The MPGB005HTYZ4DEOFS1AZPF12016K1NN motor pump belongs to the MPGB-AZPF Close-Coupled Motor Pumps series from Bosch Rexroth and is intended to supply hydraulic power to automated machinery. A pump displacement of 0.98 in³ per revolution (16 cc/rev) sets the basic volume of oil moved each shaft turn, while a maximum flow of 7.6 gpm (28.8 L/min) supports medium-duty actuators that need steady delivery. The 5 HP motor furnishes the mechanical energy required to keep this flow available throughout the duty cycle, and its rated speed of 1750 rpm at 60 Hz aligns with common North American supplies. A downward-facing suction port streamlines reservoir plumbing by allowing a direct vertical line, and the SAE-16 (1-5/16-12 UN-2B) suction fitting accepts standard hydraulic hose ends. The 184TYZ frame establishes the mounting footprint and shaft height so the assembly can bolt to typical pump bases without adapters.

The pump can maintain 1320 psi (91 bar) at full 5 HP flow, giving designers a clear ceiling for circuit pressure without oversizing components. A totally enclosed fan-cooled (TEFC) enclosure shields the motor windings from airborne oil mist and shop dust, promoting long bearing life. The four-pole construction balances torque production with acceptable speed for 50 or 60 Hz operation, and at 50 Hz the shaft turns at a rated 1450 rpm for regions using that frequency. Placing the junction box at the F1 location moves the conduit entry to the left side when facing the shaft, simplifying connection inside right-hand power units. System pressure exits through an SAE-10 (7/8-14 UNF-2B) port, giving a dedicated outlet for high-pressure lines. The complete assembly weighs 118 lb, allowing a single technician with a chain hoist to install the unit into compact hydraulic power modules.