MPGB005HTYZ4DEOFS1AZPF12005K1NN

The MPGB005HTYZ4DEOFS1AZPF12005K1NN motor pump belongs to the MPGB-AZPF Close-Coupled Motor Pumps series and is manufactured by Bosch Rexroth for hydraulic automation where compact power units are needed. With a rated power of 5 HP (3.7 kW), the integral motor supplies sufficient torque to drive the connected gear pump under continuous duty. A pump displacement of 0.34 in³ per revolution (5.5 cm³/rev) defines the volume moved each shaft turn, allowing predictable flow calculations. When operated on a 50 Hz supply the shaft turns at a nominal 1450 rpm, matching regions that use that grid frequency, while a 60 Hz line raises nominal speed to 1750 rpm for markets that follow North American standards. At its rated speed the assembly delivers a maximum flow of 2.6 gpm (9.9 L/min), providing steady fluid delivery for small hydraulic circuits. The suction port uses an SAE-10 (7/8-14 UNF-2B) thread so installers can attach common return hoses, and the port faces downward which promotes gravity-assisted oil entry and helps avoid cavitation.

The pump sustains up to 3850 psi (265 bar) at full flow, enabling it to power actuators that require high working pressure. An SAE-8 (3/4-16 UNF-2B) pressure port carries this discharge to the hydraulic system and matches widely available tube fittings. The motor frame size is 184TYZ, giving standardized foot dimensions for integration with industrial brackets. Because there are no mounting rails, the housing bolts directly to a skid or reservoir lid to reduce components and keep alignment tight. A four-pole winding establishes the synchronous relationship between electrical frequency and shaft speed used in the ratings noted earlier. The overall length of 16.85 in must be checked against enclosure space so the assembly can be installed without interference, and a total weight of 117 lb informs lifting gear selection during maintenance or initial placement.