Bosch Rexroth | MPGB005HTYZ46EZFS1HA10010DRKNN1NN
MPGB005HTYZ46EZFS1HA10010DRKNN1NN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The MPGB005HTYZ46EZFS1HA10010DRKNN1NN is a close-coupled motor pump built by Bosch Rexroth for the MPGB-A10VSO Close-Coupled Motor Pumps series and is intended to supply pressurized fluid to hydraulic actuators. A displacement of 0.61 in³ per revolution (10 cc/rev) defines the volume moved each shaft turn, while a rated speed of 1750 rpm keeps that delivery consistent in typical industrial duty cycles. The motor section is specified for 5 HP so that the hydraulic end can sustain its flow without overload. Electrical service matches a dual-voltage rating of 208–230/460 V at 60 Hz, simplifying installation on standard three-phase mains. The 184TYZ motor frame sets the mounting footprint and shaft height, and an overall length of 19.95 in helps planners check envelope limits inside compact power units.
System performance peaks at a maximum pressure of 1650 psi (110 bar) when the pump is delivering its full flow of 4.5 gpm (17 L/min), giving designers clear limits for cylinder sizing and relief valve selection. A suction port threaded for SAE 16 (1-5/16-12 UNF-2B) accepts the low-pressure supply line, while the pressure port uses an SAE 12 (1-1/16-12 UNF-2B) connection to route fluid to downstream components. Excess case leakage exits through an SAE 06 (9/16-18 UNF-2B) drain, protecting shaft seals by keeping housing pressure low. There is no thru drive, so the unit cannot power an additional pump in tandem, which simplifies alignment but limits expandability. Total weight is 110 lb, a factor considered when selecting mounting hardware and vibration isolators.
Technical Specifications
Case Drain Port
SAE 06 (9/16-18 UNF-2B)
Displacement
0.61 in³/rev (10 cc/rev)
Frequency
60 Hz
Horsepower
5 HP
Max Flow
4.5 gpm (17 L/min)
Max Pressure At Full Flow
1650 psi (110 bar)
Motor Frame
184TYZ
Overall Length
19.95 in
Pressure Port
SAE 12 (1-1/16-12 UNF-2B)
Rated Speed
1750 rpm
Suction Port
SAE 16 (1-5/16-12 UNF-2B)
Thru Drive
None
Total Weight
110 lb
Voltage
208–230/460 V
1620 Old Apex Road
Shipping & Payment Options
