Bosch Rexroth | M-4SEW10D1X630MG24N9K4
M-4SEW10D1X/630MG24N9K4
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-4SEW10D1X/630MG24N9K4 poppet valve belongs to the M-SEW Poppet Valves series manufactured by Bosch Rexroth for hydraulic automation circuits that require leak-tight directional control. It follows a 4/2 directional design identified as Symbol D, so hydraulic flow is routed between two positions through four ports. The valve tolerates system pressures up to 630 bar, making it suitable for high-pressure clamps, presses, or test rigs. A high-power air-gap solenoid provides the actuation force and is designed for continuous service. This coil is energized with a nominal 24 V DC supply and accepts a ±10 percent voltage deviation to accommodate common power variations. During operation the coil draws 30 W and supports a 100 percent duty cycle, allowing it to remain energized without a cooling pause.
The coil’s surface may reach 120 °C under continuous load, so surrounding components must be rated for this temperature. When the appropriate connector is fitted the housing meets IP65, protecting internal parts from dust and low-pressure water jets. Electrical termination is handled by a DIN EN 175301-803 type K4 plug, simplifying installation in multi-valve manifolds. The hydraulic fluid should meet ISO 4406 cleanliness class 20/18/15 to preserve the poppet sealing edges. A concealed manual override designated N9 permits mechanical shifting during commissioning or power loss. Because the valve can be mounted in any orientation, designers have flexibility in manifold layouts. A spool position switch is not included, so external sensing must be added if electrical state feedback is necessary.
Technical Specifications
Coil Max Surface Temperature
120 °C
Contamination Class
ISO 4406 20/18/15
Directional Design
4/2 (Symbol D)
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803 (K4)
Installation Position
Any
Manual Override
Concealed (N9)
Nominal Voltage
24 V DC (G24)
Power Consumption
30 W
Pressure Rating
630 bar
Protection Class
IP65 (with connector)
Solenoid Type
High-Power Air-Gap (M)
Spool Position Switch
Not Included
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
