Bosch Rexroth | M-3SEW6U3X630MG96N9K4B08
M-3SEW6U3X/630MG96N9K4/B08
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-3SEW6U3X/630MG96N9K4/B08 valve is manufactured by Bosch Rexroth within the M-SEW Poppet Valves series. It is a 3/2 directional seat valve used to open or block hydraulic flow paths in automation manifolds. The size 6 format defines the cavity dimensions and aligns flow passages with common subplates. An NFPA T3.5.1 D03 interface lets the unit bolt straight onto standardized D03 stack bodies, while the ISO 4401-03-02-0-05 porting pattern keeps passage alignment consistent across different manufacturers. A maximum operating pressure rating of 630 bar allows the valve to handle very high-pressure circuits without loss of sealing integrity, and a tank port limit of 100 bar protects the return line components. Flow capacity reaches 25 l/min, giving adequate throughput for medium-size actuators. A concealed manual override permits local shifting during maintenance without exposing the mechanism to contamination.
The wet-armature coil runs on 96 V DC so panels can feed it directly from regulated DC buses, and a ±10 % voltage tolerance ensures proper shifting even when supply levels fluctuate. Continuous energization is supported by a 100 % duty cycle, while power consumption is held to 30 W to minimize heat load on control cabinets. The coil surface may reach 120 °C at maximum temperature, a figure that guides insulation selection and ambient derating. A DIN EN 175301-803 K4 connector provides quick electrical hookup and supports field replacement without soldering. The IP65 protection class seals the body against dust and water jets, enabling reliable service in wash-down areas. Overall weight of 1.5 kg helps installers maneuver the valve when assembling stacks or replacing components in confined spaces.
Technical Specifications
Coil Max Surface Temp
120 °C
Coil Voltage
96 V DC
Duty Cycle
100%
Electrical Connector
DIN EN 175301-803 K4
Interface
NFPA T3.5.1 D03
Manual Override
Concealed
Max Flow
25 l/min
Max Operating Pressure
630 bar
Porting Pattern
ISO 4401-03-02-0-05
Power Consumption
30 W
Protection Class
IP65
Size
6
Tank Port Max Pressure
100 bar
Valve Type
3/2 Directional Seat Valve
Voltage Tolerance
±10%
Weight
1.5 kg
1620 Old Apex Road
Shipping & Payment Options
