Bosch Rexroth | M-3SEW6U3X420MG96N9K4V-CSA
M-3SEW6U3X/420MG96N9K4/V CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-3SEW6U3X/420MG96N9K4/V CSA poppet valve is produced by Bosch Rexroth as part of the M-SEW Poppet Valves series. It controls hydraulic actuator circuits by switching flow between ports in automation systems. The valve follows a 3/2-way configuration identified by symbol U, so it alternates one inlet between two outlet conditions. Size 6 dimensions match subplate layouts common in compact manifolds, and the ISO 4401-03-02-0-05 (D03) mounting interface allows direct installation on standardized base plates. A DIN 24340 Form A porting pattern aligns internal passages with manifold galleries to reduce plumbing. The unit withstands operating pressures up to 420 bar and passes up to 25 l/min, making it suitable for medium-flow servo lines. A 30 W solenoid generates the force required to shift the poppet while maintaining quiet response. Continuous service is supported by a 100 percent duty cycle, so the coil can remain energized without cooling intervals.
Electrical supply for the solenoid is 96 V DC, delivered through a DIN EN 175301-803 connector that also provides strain relief in mobile equipment. When the mating plug is attached the assembly attains an IP65 protection class, guarding the coil and wiring against dust and low-pressure water jets. The coil surface may reach 120 °C during prolonged energization, so adjacent components must tolerate that temperature. A concealed manual override permits local actuation for setup work without exposing moving parts to contaminants. The hydraulic fluid must meet ISO 4406 cleanliness class 20/18/15 to protect the precision poppet seat from abrasion. FKM seals resist typical mineral oils and elevated temperatures, extending service intervals in hot circuits. Overall mass is 1.5 kg, which keeps manifold weight low and eases handling during replacement.
Technical Specifications
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803
Fluid Cleanliness Class
ISO 4406 20/18/15
Manual Override
Concealed
Maximum Coil Surface Temperature
120 °C
Maximum Flow
25 l/min
Maximum Operating Pressure
420 bar
Mounting Interface
ISO 4401-03-02-0-05 (D03)
Nominal Voltage
96 V DC
Porting Pattern
DIN 24340 Form A
Protection Class
IP65 (with connector)
Seal Material
FKM
Size
6
Solenoid Power
30 W
Valve Function
3/2-Way (Symbol U)
Weight
1.5 kg
1620 Old Apex Road
Shipping & Payment Options
