Bosch Rexroth | M-3SEW6U3X420MG24K4QMAG24
M-3SEW6U3X/420MG24K4QMAG24
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-3SEW6U3X/420MG24K4QMAG24 poppet valve belongs to the M-SEW Poppet Valves series and is manufactured by Bosch Rexroth for hydraulic automation tasks that require reliable shut-off and directional control. Valve size 6 defines the flow passages and overall envelope, while the NFPA D03 mounting interface lets the unit bolt directly to common subplates. Its ISO 4401-03-02-0-05 porting pattern aligns manifold drillings without adapters, and the three ports support a 3/2 configuration for pressure, tank, and actuator lines. A maximum operating pressure of 420 bar enables use in high-pressure circuits, and a rated flow of 25 l/min sets the throughput it can handle without excessive pressure loss. The coil is energized by a 24 V DC supply, and the electrical load is 30 W, so power budgeting in the control cabinet is straightforward.
A continuous 100 percent duty cycle permits the solenoid to remain energized indefinitely, and a ±10 percent voltage tolerance absorbs normal supply variations. Connection is made through a DIN EN 175301-803 K4 plug, and when the mating connector is fitted the assembly meets IP65 to resist dust and low-pressure water jets. The coil surface may reach 120 °C during extended operation, so surrounding components must withstand that temperature. Rapid actuation is possible because the valve can switch up to 15 000 times per hour as long as system pressure stays at or below 350 bar. Hydraulic fluid must be maintained at ISO 4406 cleanliness class 20/18/15 to protect the poppet and seat from contamination-induced wear. Installation is simplified by a weight of 1.5 kg, allowing a single technician to place the valve on a manifold without lifting aids.
Technical Specifications
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803 (K4)
Fluid Cleanliness
ISO 4406 Class 20/18/15
Maximum Coil Surface Temperature
120 °C
Maximum Flow
25 l/min
Maximum Operating Pressure
420 bar
Maximum Switching Frequency
15000 1/h (≤350 bar)
Mounting Interface (nfpa)
D03
Nominal Voltage
24 V DC
Number Of Ports
3
Porting Pattern (iso)
ISO 4401-03-02-0-05
Power Consumption
30 W
Protection Class
IP65 (with mating connector)
Valve Size
6
Voltage Tolerance
±10%
Weight (3/2 Valve)
1.5 kg
1620 Old Apex Road
Shipping & Payment Options
