Bosch Rexroth | M-3SEW6C3X630MG96N9K4V
M-3SEW6C3X/630MG96N9K4/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-3SEW6C3X/630MG96N9K4/V poppet valve belongs to the M-SEW Poppet Valves series and is built by Bosch Rexroth for directional control tasks in hydraulic automation systems. Its size 6 format matches subplate cavities of moderate flow circuits, while the ISO 4401-03-02-0-05 porting pattern simplifies mounting on standard manifolds. Three main ports route pressure, tank, and actuator lines through the valve body, and a high-power air-gap solenoid provides the force needed to lift or seat the poppet under load. The coil is energized at a nominal 96 V DC and draws 30 W, allowing direct drive from machine power supplies. Continuous operation is supported by a 100 percent duty cycle so the actuator can remain energized without thermal cycling. A DIN EN 175301-803 K4 connector brings wiring to the coil, and installation can be in any position to suit cramped manifolds or stack assemblies.
The hydraulic stage withstands operating pressures up to 630 bar, enabling use in high-pressure clamping or pressing circuits, while a maximum flow of 25 l/min keeps internal speed losses within limits. The coil surface can reach 120 °C without damage, which defines safe ambient and oil temperature windows during sustained actuation. An IP65 protection class prevents dust ingress and water jets from impairing the electrical parts when the valve is mounted outside enclosures. FKM seals resist common hydraulic fluids and high temperatures to maintain leak-free service life. A concealed N9 manual override lets technicians shift the poppet during commissioning without exposing moving parts. The assembly weighs 1.5 kg, light enough for dense manifold arrays yet sturdy for shop floor vibration.
Technical Specifications
Coil Surface Temp Max
120 °C
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803 (K4)
Installation Position
Any
Main Ports
3
Manual Override
Concealed (N9)
Max Operating Pressure
630 bar
Maximum Flow
25 l/min
Nominal Voltage
96 V DC
Porting Pattern
ISO 4401-03-02-0-05
Power Consumption
30 W
Protection Class
IP65
Seal Material
FKM
Solenoid Type
High-Power Air-Gap
Valve Size
6
Weight
1.5 kg
1620 Old Apex Road
Shipping & Payment Options
