Bosch Rexroth | M-3SEW6C3X630MG24N9K4
M-3SEW6C3X/630MG24N9K4
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-3SEW6C3X/630MG24N9K4 valve is produced by Bosch Rexroth within the M-SEW Poppet Valves series and is intended to switch hydraulic circuits in compact automation manifolds. It uses the 3/2 directional seat configuration to provide reliable shut-off and flow diversion for actuators. With a nominal size of 6, the flow paths fit standard subplates while keeping envelope dimensions small. The valve tolerates operating pressures up to 630 bar to suit high-pressure circuits, and it permits a maximum flow of 25 l/min without exceeding rated losses. Mounting follows the ISO 4401-03-02-0-05 porting pattern for straightforward stack installation. A concealed manual override lets maintenance staff shift the poppet without energizing the coil. Ingress protection is IP65, so the housing resists dust and water jets, and NBR seals withstand system pressure.
In service the solenoid accepts a nominal voltage of 24 V DC and draws 30 W, enabling direct connection to common machine control outputs. The coil is rated for a 100 % duty cycle, allowing continuous energization without thermal derating. Electrical termination uses the DIN EN 175301-803 K4 connector, simplifying replacement in the field. Approved hydraulic media include mineral oil types HL, HLP, HLPD, HVLP, and HVLPD, so the valve integrates with standard power units. The maximum coil surface temperature reaches 120 °C, a figure to consider for surrounding cable insulation. Switching can occur up to 3600 cycles per hour at pressures above 350 bar, giving fast response in high-demand loops. The assembly weighs 1.5 kg, keeping manifold loads low and easing manual handling during installation.
Technical Specifications
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803 (K4)
Hydraulic Fluid
Mineral Oil (HL, HLP, HLPD, HVLP, HVLPD)
Manual Override
Concealed
Max Coil Surface Temperature
120 C
Max Switching Frequency
3600 1/h (>350 bar)
Maximum Flow
25 l/min
Maximum Operating Pressure
630 bar
Nominal Size
6
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Power Consumption
30 W
Protection Class
IP65
Seal Material
NBR
Valve Function
3/2 Directional Seat Valve
Weight
1.5 kg
1620 Old Apex Road
Shipping & Payment Options
