Bosch Rexroth | M-3SEW6C3X420MG96N9K4-CSA
M-3SEW6C3X/420MG96N9K4 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-3SEW6C3X/420MG96N9K4 CSA belongs to the M-SEW Poppet Valves series from Bosch Rexroth and serves to open or block flow paths in hydraulic automation systems. It uses a 3/2 directional seat valve design to provide positive shut-off between pressure, actuator, and tank lines, while its size 6 envelope fixes the interface dimensions for manifold installation. A maximum operating pressure of 420 bar on the pressure and actuator ports permits use in high-pressure circuits, and a flow limit of 25 l/min defines the volume it can pass without excessive pressure loss. The porting pattern matches ISO 4401-03-02-0-05 so the valve mates with standard subplates, and a cleanliness requirement of ISO 4406 20/18/15 helps avoid poppet wear from contaminant particles. An NBR seal set maintains compatibility with common mineral oils, and an IP65 housing rating keeps dust and low-pressure water away from coil and terminals during machine operation.
The magnetic actuator is wound for 96 V DC and accepts a ±10 % voltage swing, allowing stable pull-in when the supply fluctuates. Continuous energization is supported by a 100 % duty cycle, and the coil draws 30 W so cabinet power budgeting can be calculated easily. A DIN EN 175301-803 (K4) connector gives plug-in wiring and strain relief at the solenoid, while a permissible coil surface temperature of 120 °C prevents insulation damage during prolonged actuation. The poppet can cycle up to 15 000 switches per hour at pressures to 350 bar, enabling rapid on-off control in servo loops, and the tank port tolerates back-pressure to 100 bar for return-line restriction scenarios. Together these electrical and dynamic limits show how the valve integrates into high-duty hydraulic manifolds that require quick response and reliable sealing.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Voltage
96 V DC
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803 (K4)
Max Coil Surface Temperature
120 °C
Max Operating Pressure (p,a)
420 bar
Max Switching Frequency (≤350 Bar)
15000 1/h
Max Tank Port Pressure (t)
100 bar
Maximum Flow
25 l/min
Porting Pattern
ISO 4401-03-02-0-05
Power Consumption
30 W
Protection Class
IP65
Seal Material
NBR
Size
6
Valve Design
3/2 Directional Seat Valve
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
