Bosch Rexroth | M-3SEW6C3X420MG24N9K4B15V
M-3SEW6C3X/420MG24N9K4/B15V
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-3SEW6C3X/420MG24N9K4/B15V poppet valve belongs to the M-SEW Poppet Valves series and is produced by Bosch Rexroth for use in hydraulic automation circuits. It performs as a 3/2 directional seat valve so it can start, stop, or divert pressure lines with leak-tight closure. The unit is built in size 6 which defines the porting interface and mounting envelope for modular manifolds. A maximum operating pressure of 420 bar allows installation in high-pressure power packs, and a peak flow capacity of 25 l/min supports medium-throughput actuators. A 1.5 mm throttle orifice in the body introduces controlled flow restriction that improves switching behavior and limits pressure shocks. Actuation is provided by a high-power air-gap solenoid energized by 24 V DC, delivering rapid response while confining power consumption to 30 W.
The housing carries an IP65 protection class so the assembly resists dust ingress and low-pressure water jets in typical machine environments. Electrical termination is through a DIN EN 175301-803 K4 connector which simplifies field wiring and enables quick coil replacement. A concealed manual override identified by the N9 code permits local actuation during commissioning or in power-loss situations. Continuous 100 % duty cycle rating means the coil may remain energized indefinitely without thermal derating, a capability reinforced by a maximum coil surface temperature of 120 °C. Cleanliness class ISO 4406 20/18/15 specifies the fluid purity required to maintain poppet sealing integrity, while FKM seals provide chemical resistance to common hydraulic oils at elevated temperatures. The assembled valve weighs 1.5 kg, allowing direct manifold mounting without additional support.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803 (K4)
Manual Override
Concealed (N9)
Max Coil Surface Temp
120 C
Maximum Flow
25 l/min
Operating Pressure
420 bar
Power Consumption
30 W
Protection Class
IP65
Seal Material
FKM
Size
6
Solenoid Type
High-Power Air-Gap
Solenoid Voltage
24 V DC
Throttle Orifice
1.5 mm
Valve Function
3/2 Directional Seat Valve
Weight
1.5 kg
1620 Old Apex Road
Shipping & Payment Options
