Bosch Rexroth | M-3SEW10C1X420MG96N9K4B18V
M-3SEW10C1X/420MG96N9K4/B18V
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-3SEW10C1X/420MG96N9K4/B18V poppet valve is produced by Bosch Rexroth for the M-SEW Poppet Valves series. It controls hydraulic flow in automated machinery by switching a 3/2 directional function identified as symbol C, which diverts pressure from one outlet to another during each cycle. The body provides three main ports so pressure, return, and actuator lines can be connected without external manifolds. A maximum operating pressure of 420 bar lets the valve serve high-pressure circuits such as clamping or pressing units. Mineral oil is the required hydraulic fluid, ensuring compatibility with standard system reservoirs. Flow is moderated by a 1.8 mm throttle orifice labeled B18 to dampen surges and improve actuator stability. Actuation is supplied by a high-power air-gap solenoid that shifts the poppet rapidly even under full load, while a concealed manual override coded N9 permits local operation during setup or troubleshooting.
The solenoid coil is rated for 96 V DC, and a ±10 % voltage tolerance allows the valve to remain functional when supply levels fluctuate. A 100 % duty cycle supports continuous energization, and the coil surface may rise to 120 °C without compromising insulation. Electrical power consumption is 30 W, which planners must include in power budgets for the control panel. Wiring is completed through a DIN EN 175301-803 K4 connector that enables quick replacement in the field. The housing carries an IP65 protection class, so dust ingress and water jets do not impair operation when the valve is mounted outside the cabinet. FKM seal material resists mineral oil and elevated temperature, maintaining tight closure over long service intervals.
Technical Specifications
Coil Max Surface Temp
120 °C
Coil Voltage
96 V DC
Directional Function
3/2 (Symbol C)
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803 (K4)
Hydraulic Fluid
Mineral Oil (M)
Main Ports
3
Manual Override
Concealed (N9)
Operating Pressure
420 bar
Power Consumption
30 W
Protection Class
IP65
Seal Material
FKM
Solenoid Type
High-Power Air-Gap
Throttle Orifice
1.8 mm (B18)
Voltage Tolerance
±10%
Voltage Type
DC
1620 Old Apex Road
Shipping & Payment Options
