BM6PN-1X/08D2-12/P2-3

The BM6PN-1X/08D2-12/P2-3 manifold block is produced by Bosch Rexroth within the BM Manifold Blocks series and serves as a mounting base that distributes hydraulic flow to multiple directional valves in automated systems. It is built in NG6 (D03) size so it aligns with compact valve stacks where space is limited. An ISO 4401-03 (D03) valve interface positions each directional valve accurately on the surface. The block follows a parallel, normal flow circuit that sends the pump supply uniformly to connected stations. Eight stations are provided, each separated by 2.13 in to maintain consistent spacing across the length. The pump port is threaded SAE-16 (1-5/16-12), and the tank port uses the same SAE-16 thread for the return line.

Gauge ports ga and gb are tapped SAE-4 (7/16-20) so pressure can be checked without additional adapters. Each station presents work ports a and b with SAE-8 (3/4-16) threads to connect cylinders or motors directly to the circuit. Typical mounting screws sized 3/8-16 x 0.75 in clamp the manifold to a subplate and keep sealing surfaces secure under load. The configuration supports hydraulic automation by delivering equal flow paths and standardized porting, allowing users to assemble valve banks quickly and service them with common fittings.