BM6PN-1X/06D2-12/P3-4

The BM6PN-1X/06D2-12/P3-4 manifold block is produced by Bosch Rexroth and forms part of the BM Manifold Blocks series. Designed for hydraulic automation, it groups multiple directional valves on a shared supply rail. The unit is built as a bar manifold, a layout that provides a straight passage for pressure and return lines along the block length. A parallel normal-flow circuit distributes pump flow equally, so each station sees the same pressure without cross-port interaction. Six stations are machined into the block, allowing up to six control valves to be installed on a single assembly. Each station observes the ISO 4401-03 mounting interface, which aligns with the D03 size-6 valve pattern, and the stations are separated by 2.13 inches to accommodate coil housings and wiring clearance.

Port connections on the BM6PN-1X/06D2-12/P3-4 follow port style 12, meaning all pressure, tank, and actuator lines terminate in SAE threaded bosses for leak-free hose or tube fittings. No isolation options are provided, so flow between adjacent stations cannot be shut off independently inside the block. The manifold also omits a relief cavity, so system over-pressure protection must be handled by an external valve. A mounting kit is supplied, enabling direct attachment to machine frames or subplates without sourcing additional hardware. Because the same mounting footprint repeats across its six stations, installers can mount solenoid, pilot, or proportional valves without further machining, which simplifies assembly in mobile or industrial hydraulic systems.