Bosch Rexroth | AZPFF-12-022016LCP2020KB-SO007
AZPFF-12-022/016LCP2020KB SO007
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZPFF-12-022/016LCP2020KB SO007 is manufactured by Bosch Rexroth for the AZPF External High Performance Gear Pumps series and supplies hydraulic flow in automated machinery. It turns counter-clockwise, so a left-hand drive must be used to match the specified direction of rotation. Pump stage I delivers 22 cm³ per revolution and stage II delivers 16 cm³ per revolution, allowing two flow rates from a single housing. The drive shaft is 17 mm in diameter and follows a 1:5 tapered profile, which centers the hub and transfers torque without slip. A maximum speed of 2500 rpm keeps gear tip velocity within safe limits. The 2-bolt 50 mm mounting flange positions the pump accurately against standard power units.
Stage I can be loaded to 210 bar and stage II to 280 bar, giving designers separate pressure ranges for sequential circuits. A peak transferable drive torque of 155 Nm defines the highest load the shaft can accept before taper damage occurs. The square flange line connection with dual 20 mm ports lines up with rigid pipework and maintains port spacing. A rear cover without a valve is fitted, so external controls must handle pressure relief. The shaft end thread is M12×1.5, providing a uniform lock-nut interface for couplings. NBR gaskets seal housing joints, while an FKM shaft seal resists hot hydraulic oil at the drive interface.
Technical Specifications
Direction Of Rotation
Left (CCW)
Drive Shaft Diameter
17 mm
Drive Shaft Type
1:5 Tapered (C)
Line Connection
Square Flange (20/20)
Max Intermittent Pressure Stage I
210 bar
Max Intermittent Pressure Stage Ii
280 bar
Max Rotational Speed
2500 rpm
Max Transferable Drive Torque
155 Nm
Mounting Flange
2-Bolt Ø50 mm (P)
Pump Stage I Displacement
22 cm³/rev
Pump Stage Ii Displacement
16 cm³/rev
Rear Cover
Without Valve (B)
Sealing
NBR, Shaft Seal In FKM (K)
Shaft End Thread
M12×1.5
1620 Old Apex Road
Shipping & Payment Options
