Bosch Rexroth | AZPFF-11-008005RCB2020MB
AZPFF-11-008/005RCB2020MB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZPFF-11-008/005RCB2020MB pump is produced by Bosch Rexroth for the AZPF External High Performance Gear Pumps series and is applied to deliver pressurized oil in hydraulic automation circuits. It contains 2 pump sections so a single drive can supply two independent flow demands. The unit is configured for clockwise rotation, which matches standard right-hand prime movers. Section I provides a geometric displacement of 8 cm³ per revolution to generate the primary flow. Section II delivers 5.5 cm³ per revolution, allowing a reduced secondary stream. The first stage tolerates intermittent pressures up to 280 bar, giving reserve capacity for peak loads. The second stage shares the same 280 bar intermittent limit to keep pressure uniform across both outlets. Rated speed reaches 4000 rpm so the pump can maintain output in high-speed power packs.
A tapered 1:5 drive shaft transfers torque while minimizing hub stress. The rectangular flange front cover with an 80 mm bolt circle aligns the housing to standard motor adapters. Section I uses line ports coded 20 on the rectangular flange for straightforward pipe connections. Section II also uses size 20 rectangular flange ports, simplifying manifold design. Mounting bolts engage M6 threads to a depth of 13 mm to secure the housing. The rear cover is the standard pattern without a valve, leaving external control components to handle regulation. NBR sealing material resists common hydraulic oils and maintains leak tightness. The shaft end incorporates an M12×1.5 thread for positive coupling with drive hubs. Total mass is 5.1 kg so handling and installation remain manageable.
Technical Specifications
Direction Of Rotation
Clockwise
Displacement (section I)
8 cm3/rev
Displacement (section Ii)
5.5 cm3/rev
Drive Shaft Type
Tapered 1:5
Front Cover Type
Rectangular Flange (Ø80 mm)
Line Ports (section I)
20 (Rectangular Flange)
Line Ports (section Ii)
20 (Rectangular Flange)
Max Pressure Pi (intermittent)
280 bar
Max Pressure Pii (intermittent)
280 bar
Max Rotation Speed
4000 rpm
Mounting Bolt Thread
M6 (13 mm Deep)
Pump Sections
2
Rear Cover Type
Standard (Without Valve)
Sealing Material
NBR
Shaft End Thread
M12x1.5
Weight
5.1 kg
1620 Old Apex Road
Shipping & Payment Options
