AZPFF-10-016/005RCB2020MB

The AZPFF-10-016/005RCB2020MB is manufactured by Bosch Rexroth in the AZPF External High Performance Gear Pumps series. It delivers hydraulic power for automation systems that require compact two-stage flow. Stage I displacement is 16.0 cm³ per revolution, providing the primary volume for low-pressure movement, while Stage II displacement is 5.5 cm³ per revolution to maintain flow once pressure builds. The assembly can turn at up to 3000 rpm to supply high throughput and will still prime reliably at 500 rpm when line pressure stays below 100 bar. Clockwise rotation simplifies coupling to standard right-hand drive arrangements. No restrictions apply to the installation position, so the pump can be mounted vertically or horizontally as space allows. A rectangular flange front cover with an 80 mm seating face aligns the housing, and matching rectangular flange ports designated Code 20 keep inlet and outlet fittings consistent with the mounting interface.

Continuous operation is rated for 250 bar, giving actuators dependable force during routine cycles, while the design tolerates 280 bar for intermittent duty and withstands short pressure peaks of 300 bar that can appear in rapid directional changes. An ambient temperature window from –30 °C to +80 °C permits outdoor or unconditioned indoor placement without thermal shielding. NBR seals are fitted to resist common hydraulic oils and to maintain elasticity across the specified temperature span. The drive shaft carries an M12 × 1.5 thread, enabling straightforward attachment to keyed couplings or flexible joints used on electric or combustion-engine prime movers. Air bleed and drain ports are positioned to match the rectangular flange pattern, so the same face that fixes the housing also streamlines circuit plumbing. These parameters allow the pump to integrate into mobile or stationary hydraulic automation where stable pressure, wide environmental tolerance, and quick service connections are required.