AZPFB-10-008/1 0RCB202MB

The AZPFB-10-008/1 0RCB202MB is produced by Bosch Rexroth as part of the AZPF External High Performance Gear Pumps series and serves as a fixed-delivery source for hydraulic automation circuits. It has a displacement of 8.0 cm³ per revolution, so each shaft turn moves that volume of hydraulic fluid. The unit turns clockwise, making it compatible with drive trains designed for right-hand rotation. Maximum speed reaches 4000 rpm, allowing high flow rates when coupled to fast prime movers. Minimum operating speed is 500 rpm at pressures below 100 bar with a viscosity of 12 mm²/s, which prevents excessive slip at low flow conditions. Continuous pressure capability is 250 bar, letting the pump maintain stable output in demanding industrial systems. The housing provides M6 mounting threads with 13 mm depth to secure the pump to motor adapters or machine frames, and the total weight of 3.3 kg aids handling during installation.

For short duty cycles, intermittent pressure may rise to 280 bar, giving additional headroom for transient load spikes. Peak pressure tolerance is 300 bar, protecting the pump from brief over-pressurization events during rapid directional changes. Shaft C can transmit up to 155 Nm of drive torque, ensuring mechanical integrity when the pump operates at its maximum limits. The front cover uses an Ø80 mm rectangular flange that aligns with common motor faces to simplify assembly. A standard rear cover is fitted, maintaining dimensional consistency with other pumps in the series. Fluid ports are arranged on a square flange coded 20, providing a rigid connection for inlet and outlet lines. NBR sealing material contains the hydraulic fluid and resists common mineral oils, preserving service life under continuous duty.